505383
11
Zoom out
Zoom in
Previous page
1/16
Next page
2 6
Chapter 3 - Using the coffee maker
4 . 1 - M A L F U N C T I O N S
Malfunctions or leaks could be caused by:
- the plug is not connected to the mains power supply or the power cable is not connected
to the snap-in socket on the coffee maker;
- the main ON/OFF switch is in position
¢ off;
- there is no water in the tank;
- the pod holder filters are clogged;
- worn seal: check the seal on the top half of the pod holder and if worn or damaged
replace (fig. 7);
- if when dispensing hot water or steam (optional accessory) liquid pours out of the coffee
spout check the pod holder lever is pushed to the left as described at point 3.1.
We recommend that qualified and authorised personnel perform repair and servicing work
and only use GRIMAC original replacement parts. Should malfunctions persist, contact you
local GRIMAC authorised service centre.
WARNING! Before removing COVERS to access components, ALWAYS
disconnect the plug at the mains socket-outlet. Never touch compo-
nents with hands, objects or tools if the coffee maker is still connected
to the mains power supply.
Insert a coffee pod in the pod holder and make sure its sits evenly.
Push the lever to the right to close pod holder (fig. 4).
Place a cup under the brewing spout and press either the single or double serving but
-
ton to dispense coffee (fig. 4).
Dispensing will stop automatically.
Push the lever to the left to open the pod holder, remove and throw away the used pod
(fig. 3) and then close the pod holder by pushing the lever to the right.
Turn off the machine after serving coffee if used occasionally.
Before using the coffee maker for normal use, it is recommended to
clean the internal components (heat exchanger - boiler -, piping and
pod holders). This is done by simply brewing a cup of coffee to flush
the system which is then “thrown away - do not drink”. The pod coffee
maker is now ready to make excellent espresso coffee.
Chapter 4 - Troubleshooting and remedies
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Grimac TERRY TECH at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Grimac TERRY TECH in the language / languages: English as an attachment in your email.

The manual is 1,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info