644658
4
Zoom out
Zoom in
Previous page
1/42
Next page
4
SAFETY INFORMATION
the chain saw handles. Serious injury to the operator, helpers, bystanders, or any combination
of these persons may result from one-handed operation. A chain saw is intended for two-
handed use.
Avoid body contact with grounded surfaces such as metal pipes and wire fences. There is an
increased risk of electric shock if your body is grounded.
Do not operate a chain saw that is damaged, improperly adjusted, or not completely and
securely assembled. Chain should slow to a stop when the switch trigger is released. If the
chain continues to turn after the switch trigger has been released, have the unit serviced by
your nearest GREENWORKS service dealer.
Check for damaged parts. Check for alignment of moving parts, binding of moving parts,
breakage of parts, mounting, and any other conditions that may affect its operation. A guard
or other part that is damaged should be properly repaired or replaced by an authorized
service dealer unless otherwise indicated elsewhere in this manual.
All chain saw service, other than the items listed in the operation and maintenance sections,
should be performed by your nearest GREENWORKS service dealer.
Always maintain a proper stance.
Do not use chain saw if switch does not turn it on and off. Have defective switch replaced by
authorized service centre.
Remove the battery when not in use, before servicing, and when making adjustments and
changing attachments, such as saw chain and bar.
Do not cut vines and/or small underbrush.
Do not operate a chain saw in a tree, on a ladder, or scaffold; this is extremely dangerous.
NOTE: The size of the work area depends on the job being performed as well as the size tree or work piece
involved. For example, felling a tree requires a larger work area than making bucking cuts.
Use extreme caution when cutting small size brush and saplings, because small material may
catch the saw chain and be whipped toward you or pull you off balance.
When cutting a limb that is under tension, be alert for spring back so that you will not be struck
Do not force the chain saw. The job can be performed better and safer at the rate for which it
was intended.
Always use the right product for your application. The chain saw should be used for cutting
wood only. Never use the chain saw to cut plastic, masonry or non-wood building materials.
Do not use the chain saw for purposes not intended.
Store chain saw when not in use. Chain saw should be stored in a dry and high or locked area
out of the reach of children.
Save these instructions. Refer to them frequently and use them to instruct others who may
use this tool. If you loan someone this tool, loan them these instructions also.
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Greenworks 20312 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Greenworks 20312 in the language / languages: English as an attachment in your email.

The manual is 16,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info