505372
23
Zoom out
Zoom in
Previous page
1/25
Next page
Testing and post-installation verification
23
Check After Installing
Test Operation
Is the unit firmly attached
1. Before test operation
(1) Do not switch on power before installation is entirely complete.
(2) The electric wiring must be connected correctly and securely.
(3) The cut-off valves on the connection pipes should be opened.
(4) All the impurities such as scraps and thrums must be cleared from the unit.
2. Test operation method
(1) Switch on power, press the " " button on the wireless remote control to start the unit.
(2) Press the MODE button and select COOL, HEAT, then FAN to check that they run correctly.
The unit may fall, shake or make noise.
Items to be checked Possible malfunction
Has the refrigerant been tested for leakage It may cause insufficient cooling(heating).
Is the heat insulation sufficient? It may cause condensation and dripping.
Does the water drain well? It may cause condensation and dripping.
Is the voltage in accordance with the rated
voltage marked on the nameplate?
It may cause and electrical malfunction or
damage the part.
Are the electrical wiring and piping
connections installed correctly and securely?
It may cause and electrical malfunction or
damage the part.
Has the unit been connected to a secure
ground connection?
It may cause electrical leakage.
Is the power cord specified? It may cause an electric malfunction or damage
the part
Have the inlet and outlet been covered? It may cause insufficient cooling (heating)
Have the length of the connection pipes and
refrigerant capacity been recorded?
The refrigerant capacity is not accurate.
Test et vérification après l’installation
23
Vérification après l’installation
Test après l’installation
L’appareil est-il fixé solidement?
1. Avant le test
(1) N’allumez pas l’appareil avant qu’il soit installé.
(2) Les fils électriques doivent être raccordés de manière adéquate et sécuritaire.
(3) Les soupapes d’arrêt des tuyaux de raccordement devraient être ouvertes.
(4) Toutes les impuretés, comme les rebuts et les déchets, doivent être retirées de l’appareil.
2. Méthode de test
(1) Allumez l’appareil et appuyez sur le bouton « » de la télécommande.
(2) Appuyez sur le bouton « MODE » et sélectionnez « COOL », « HEAT » ou « FAN » pour vérifier si
l’appareil fonctionne bien.
L’appareil pourrait tomber, vibrer ou faire du bruit.
Articles à vérifier Défectuosité possible
Avez-vous testé le réfrigérant récemment? Il pourrait nuire à la capacité de refroidissement
(chauffage).
L’appareil est-il suffisamment isolé contre la chaleur?
Cela pourrait entraîner la formation de conden-
sation ou l’appareil pourrait dégoutter.
L’eau est-elle drainée correctement? Cela pourrait entraîner la formation de conden-
sation ou l’appareil pourrait dégoutter.
La tension correspond-elle à la tension nominale
qui figure sur la plaque signalétique?
Cela pourrait entraîner un problème électrique
ou endommager des pièces.
Les fils électriques et les tuyaux sont-ils installés
solidement et de manière sécuritaire?
Cela pourrait entraîner un problème électrique
ou endommager des pièces.
L’appareil a-t-il été mis à la terre de manière
adéquate?
Cela pourrait entraîner une dispersion électrique.
Le cordon d’alimentation est-il fourni? Cela pourrait entraîner un problème électrique
ou endommager des pièces.
L’entrée ou la sortie est-elle bloquée?
Cela pourrait nuire à la capacité de
refroidissement (chauffage).
La longueur des tuyaux de raccordement et la
capacité du réfrigérant ont-elles été vérifiées?
La capacité du réfrigérant est inappropriée.
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gree GWC-12KF at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gree GWC-12KF in the language / languages: English as an attachment in your email.

The manual is 4,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info