637246
115
Zoom out
Zoom in
Previous page
1/117
Next page
Page 51/53
14. ERROR MESSAGE SCREEN
The error will be displayed on the LCDisplay.
[ INPUT VOLTAGE ]
[ NO BATTERY ]
[ REVERSE POLARITY ]
* The present input * A battery is not * A battery is
voltage is _0.00V. connected to the connected to the
* Please check the outpu t output in reverse !
input voltage. * Please connect the * Please correctly
* The input voltage battery to the connect the battery
must be 11-15V. to the output.
output then
restart !
[ OPEN CIRCUIT ]
[ SHORT-CIRCUITED ]
[LOW OUTPUT VOLTAGE ]
* A battery is * Output short- * Output voltage is
disconnected during circuited. lower than the
an operation. * Please check the selected cells or
output.
* Please reconnect voltages
the battery and * Please select
restart!
proper cells or
voltages
[HIGH OUTPUT VOLTAGE]
[TEMPERATURE SENSOR ]
[ BAT. TEMP TOO LOW ]
* Output voltage is * A temperature * Battery temp is too
higher than the sensor is connected low to be operated!
selected cells or in reverse or is
defective.
voltages
* Please select
proper cells or OUTPUT _0.000V
voltages BATT TEMP __0.0°F
[ BAT. TEMP TOO HIGH]
[ INTERNAL TEMP ]
[DATA COMMUNICATION ]
* Battery temp is too * Internal temp is * Something is wrong
high to be operated! too hot ! with the internal
* Contact Hobby circuit.
Services if this * Contact Hobby
message appears Services
often.
OUTPUT _0.000V
BATT TEMP __0.0°F
[ BAL.VOLTAGE HIGH ]
[ BAL.VOLTAGE LOW ]
[ CALIRATION DATA ]
* Balancer cells * Balancer cells *Either calibration
voltage is too voltage is too data or internal
high !! low !! circuit might have
over cell is [0] low cell is [0] been damaged.
[ NO SENSOR ]
[MOTOR OVER CURRENT ] [ LINK COMMAND ]
* Link order failed ! * A temp-sensor is * Please reconnect
Error occured in the not connected to the the motor and
counterpart channel ! restart!
port
* Please connect the
temp-sensor to the
port then restart !
[ CONNECTION ]
[ MOTOR FUNCTION ]
* selected cells and * Can not start the
cells connected to motor function,
the balancing port because other Output
are different ! is used !
* Please recheck and * Please stop other
restart !
Output function to
start the motor !
115


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Graupner PRX-5A - 6444 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Graupner PRX-5A - 6444 in the language / languages: German as an attachment in your email.

The manual is 3,2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info