637252

Graupner MICRO MAGIC 2014 Manual

14
Zoom out
Zoom in
Previous page
1/15
Next page
GRAUPNER GmbH & Co. KG D-73230 KIRCHHEIM/TECK GERMANY
#0057088
Keine Haftung für Druckfehler. Technische Änderungen vorbehalten! No liability for printing errors. We reserve the right to introduce
modifications. Sous réserve de modifications! Nous ne sommes pas responsables d’éventuelles erreurs d’impression! 11/2006
30
Parts List
No. Description No. off Material Size in mm
1 Front support plate (boatstand) 1 Plywood 4 mm, laser-cut
2 Rear support plate (boatstand) 1 Plywood 4 mm, laser-cut
3 Side panel (boatstand) 4 Plywood 4 mm, laser-cut
4 Protective stand lining material 1 Self-adhesive foam tape Cut lengths to suit
5 Keel / mast socket 2 ABS Vac.-moulded,
CNC-trimmed
6 Mast support reinforcement 2 Plywood 2 mm, laser-cut
7 Servo mount support 2 Plywood 2 mm, laser-cut
8 Hull 1 ABS Vac.-moulded,
CNC-trimmed
9 Bow reinforcement 1 Plywood 2 mm, laser-cut
10 Rudder bush reinforcement 2 Plywood 2 mm, laser-cut
11 Servo plate 1 Plywood 2 mm, laser-cut
12 Sail servo reinforcement 2 Plywood 2 mm, laser-cut
13 Jib trim servo reinforcement 1 Plywood 2 mm, laser-cut
14 Deck 1 ABS Vac.-moulded,
CNC-trimmed
15 Cockpit bulkhead 1 Plywood 2 mm, laser-cut
16 Rudder servo plate 1 Plywood 2 mm, laser-cut
17 Rudder servo reinforcement, large 1 Plywood 2 mm, laser-cut
18 Rudder servo reinforcement, small 1 Plywood 2 mm, laser-cut
19 Central bulkhead 1 Plywood 2 mm, laser-cut
20 Shroud reinforcement 2 Plywood 2 mm, laser-cut
21 Canopy latch reinforcement 4 Plywood 2 mm, laser-cut
22 Stern reinforcement 1 Plywood 2 mm, laser-cut
23 Stern side reinforcement 2 Plywood 2 mm, laser-cut
24 Captive nut 4 Metal M2
25 Central girder 1 Spruce strip 3 x 8 x 210 mm
26 Rudder bush 1 Brass tube 4 Ø x 3.1 Ø x 30 mm
27 Rudder 1 Plastic Ready made
28 Rudder servo 1 Order No. 5125.LOSE Ready made
29 Rudder servo output arm 2 Order No. 3941.50 Ready made
30 Tiller 1 Plastic Ready made
31 Cable guide 2 Snake inner sleeve 2 Ø x 0.8 x 15 mm
32 Sheet guide 2 Plastic Ready made
33 Fillister-head screw 14 Stainless steel 2.2 Ø x 6.5 mm
34 Ring-screw 4 Nickel-plated brass 3.8 Ø x 1.5 Ø x 11 mm
35 Washer 5 Nickel-plated brass 4.5 Ø x 2.2 Ø x 0.5 mm
36 Sail-setting servo 1 Order No. 4103.LOSE Ready made
37 Jib trim servo 1 Order No. 5125.LOSE Ready made
38 Switch 1 Order No. 3934.1 Ready made
39 Sail-setting lever 1 Plastic Ready made
40 Pulley block 2 Plastic Ready made
41 Fillister-head screw 2 Stainless steel 2.2 Ø x 9.5 mm
42 Jib sheet 1 Polyester cord 0.4 Ø x 500 mm
43 Washer 3 Nickel-plated brass Ready made
44 Mainsail sheet 1 Polyester cord 0.4 Ø x 500 mm
45 Rudder steering cable 2 Polyester cord 0.4 Ø x 300 mm
46 Tensioner 9 Plastic Ready made
47 Turnbuckle 4 Plastic Ready made
48 Keel 1 Plastic Ready made
49 Keel adaptor set 4 Plastic Ready made
50 Keel ballast bulb 1 Lead (TOXIC !) Ready made
51 Retaining pin 2 Steel 1.5 Ø x 15 mm
52 Keel bulb fairing 2 ABS Vac.-moulded
53 Retaining nut 1 Nickel-plated brass M2.5
54 Gasket 1 Rubber cord 2.5 mm Ø, overlength
55 Canopy 1 ABS Vac.-moulded, CNC- trimmed
56 Mast 1 CFRP tube 5 Ø x 4 Ø x 850 mm
57 Mast sleeve 1 Aluminium tube 6 Ø x 5 Ø x 115 mm
… 14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Graupner MICRO MAGIC 2014 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Graupner MICRO MAGIC 2014 in the language / languages: English as an attachment in your email.

The manual is 0,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info