747929
3
Zoom out
Zoom in
Previous page
1/15
Next page
4
1. INTRODUCTION
3. FEATURES
2. FLYING SAFETY
Read the ENTIRE instruction manual to become familiar with the features of the
product before operating. Failure to operate the product correctly can result in
damage to the product, personal property and cause serious injury.
WARNING
Graupner HoTT receivers are compatible with all of Graupner transmitters and used to
airplane, helicopter and glider. HoTT system gives user real-time information on various
useful data such as user model’s RPM, voltage, temperature, user programmable warn
-
ing, and so on which are directly obtained from telemetric speed controllers equipped
with this HoTT system without having to install separate sensor devices. Of course, all of
those telemetric data can be also transmitted from separate sensor devices. The use of
up to 75 hopping channels provides advanced reliable operation while keeping from any
external interference.
All instructions, warranties and other collateral documents are subject to change at the
sole discretion of Graupner. For up-to-date product literature, visit http://www.openhob
-
by.com and click on the support tab for this product
1. Do not y your model near spectators, parking areas or any other area that could
result in injury to people or damage of property.
2. Ensure that all channels are working in the proper manner.
3. Perform a ground range check prior to the initial ight of the day
4. Do not y during adverse weather conditions. Poor visibility can cause disorientation
and loss of control of your aircraft. Strong winds can cause similar problems
5. We strongly recommend to set the Failsafe function and also recommend that the
preset Failsafe would be idle position
6. You need to set the function of the transmitter after removing a power battery from a
model or stopping a engine of a model.
7. Ensure that all your batteries have been properly charged prior to ight.
- The use of up to 75 channels ensures extreme operating reliability and immunity to
external interference.
- The broad reception voltage range of 3.6 V - 8.4 V (functional to 2.5 V) ensures full
func tionality even when voltage uctuates.
- Two LEDs signal operating status.
- The optimized sizes and weights
- Receiver input sensitivity and thus the range have been increased further.
- Servo connections in the front panel.
- Failsafe, Hold, OFF, and standard (channel 1 failsafe; all others hold) programmable.
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Graupner GR-24L HoTT - S1022 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Graupner GR-24L HoTT - S1022 in the language / languages: English as an attachment in your email.

The manual is 1,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info