482100
31
Zoom out
Zoom in
Previous page
1/33
Next page
Press ... for at least 5 seconds to activate a defrosting cycle.
This function is only effective if the evaporator is colder than +8°C.
Press ... for at least 5 seconds to activate an IFR chill cycle.
Press ... for at least 5 seconds to activate a blast freeze cycle.
*
This does not apply for KPS 20 CH and KPS 40 CH and CF.
Press ... for at least 5 seconds to activate a blast chill cycle.
*
Press ... for at least 5 seconds to activate a pre-cooling cycle. At the end of
the pre-cooling cycle (–25°C internal temperature) insert product and close
door. The desired programme must now be selected.
Control panel with buttons and display
Short cut to
defrosting.
Main menu display.
Activate the short
cut keys from
this menu.
Short cut to
Blast Chilling.
Short cut to
pre-cooling.
Short cut to IFR. Also allows
access to the main menu.
Short cut to
Blast Freezing.
Quick Guide
See page 10 for more information about use of the short cut keys...
Access to main menu: Press several times until the main menu is displayed.
At the end of every cycle the cabinet will give an acoustic signal and automatically
switch to storage mode. The default storage temperature is +2°C for blast chilling and
–22°C for blast freezing.
*
Using the Probe: When using the temperature probe and short cut buttons for chill or freeze the cycle will be controlled
by the core temperature. If the probe is not used: A) The chill/freeze cycle will automatically be controlled by time or
B) If the probe is colder than the desired temperature the cabinet will start a storing cycle (display shows -Store).
To remedy this press START/STOP to interrupt the cycle. Then heat the probe using warm water. The chill/freezer cycle is
now ready for use. The desired cycle is then activated.
Parameters for blast chilling without use of probe: –5°C room temperature, 100% fan speed and 90 minutes duration.
Parameters for blast freezing without use of probe: –25°C room temperature, 100% fan speed and 240 minutes duration.
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gram KPS90 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gram KPS90 in the language / languages: English as an attachment in your email.

The manual is 0,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Gram KPS90

Gram KPS90 User Manual - German - 33 pages

Gram KPS90 User Manual - Dutch - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info