506307
12
Zoom out
Zoom in
Previous page
1/14
Next page
3.0 Sicherung
Sicherung der Messerschneide
Schnittstärke (6) auf 0 stellen. Schlitten bis Endanschlag schieben, so daß der Daumenschutz des Schlittens die
Messerschneide abdeckt (Abb. 1). Durch Eindrücken des Knopfes (11) wird der Schlitten festgesetzt. Lösen des
Schlittens: Knopf (11) wieder herausziehen, bis dieser bündig zum Schlittengehäuse steht (Abb. 2).
3.0 Securing the machine
Making the blade edge safe
Set slice thickness (6) to 0. Slide the carriage to the end stop so that the carriage thumb protector covers
the blade edge (Fig. 1). The carriage is locked by pressing in the button (11). To release the carriage: pull
out the button (11) until it is flush with the carriage casing (Fig. 2).
3.0 Sécurité
Dispositif de sécurité de la lame
Placer le sélecteur d’épaisseur de tranchage (6) sur 0. Pousser le chariot jusqu’à la butée de fin de course, de
sorte que le protège-doigts du chariots recourvre le tranchant de la lame (ill. 1). Pour bloquer le chariot, enfon-
cer le bouton (11). déblocage du chariot: tirer sur le bouton (11) jussqu’à ce que ce dernier affleure le boîtier
du chariot (ill. 2).
3.0 Sicurezza
Dispositivo di sicurezza della lama
Posizionare la manopola di regolazione dello spessore (6) di taglio sullo zero. Spingere il carrello fino al dispo-
sitivo d’arresto di fine corsa in modo che il salvadita del carrello rcopra il filo della lama (ill. 1). Premendo il
pulante (11) viene bloccato il carrello. Per sbloccare il carrello estrarre il pulsante (11) finché quest’ultimo si
trovi alla stessa altezza del vano del carrello (ill. 2).
3.0 Beveiliging
De beveiliging van de mes-snede
De snijdikte-regellar (6) op 0 stellen. De slede tot aan de aanslag duwen, zodat de duimbescherming van de
slede de messnede afdekt (zie afb. 1). Door het indrukken van de knop (11) wordt de slede vastgezet. Het los-
maken van de slede: knop (11) uittrekken, totdat deze stevig tegen het slede-omhulsel drukt (zie afb. 2).
3.0 Sikring
Sikring af knivsæggen
Skærestyrken stilles (7) på 0. Slæden skubbes helt ind til stopanslaget, således at slædens tommelfingerbe-
skyttelse dækker over knivsæggen (Billede 1). Ved at trykke knappen (11) ind arreteres slædes. Løsning af slæ-
den: knap (11) trækkes så langt ud igen, at den ligger glat i nivveau med slædehuset (Billede 2).
GB
F
I
NL
DK
D
1 2
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Graef TENDENZA T10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Graef TENDENZA T10 in the language / languages: English, German, Dutch, Danish, French, Italian, Spanish as an attachment in your email.

The manual is 2,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info