670594
7
Zoom out
Zoom in
Previous page
1/9
Next page
1312
Craft pitches/angles
forward or backward.
Adjust Pitch Trim.
Reset Button
Flying Tips & Features
Tips for Safe Operation
It is recommended to only fly in large, open spaces that are free of obstacles like
power lines, trees, ceiling fans, etc.
When flying indoors, avoid walls and ceilings, as the craft will be drawn towards them
if closer than 2-3 feet.
Stand behind the craft when first taking off, so that you and the craft are facing the
same “forward” direction. This will help with orientation when the craft is airborne.
Novice pilots should move the controls slowly and deliberately to get used to the
craft’s flying characteristics. Try using one control at a time.
Practice basic flight operations like take off, hovering, and landing.
If you get into trouble or if anything obstructs the rotors, cut power immediately and
safely clear the obstruction. Check for possible damage before flying again.
Speed Setting
Press the Speed button once to set the craft’s speed.
Low: Provides smooth and predictable control of the craft. The remote will chime once
to indicate the low speed setting.
Medium: The craft will move and respond faster to all control inputs. The remote will
chime twice to indicate the medium speed setting.
High: Highest setting for maximum performance. The remote will chime three times to
indicate the high speed setting.
Trim Adjustment
Gyroscope Recalibration
If the craft is experiencing difficulty flying or is
behaving erratically, it’s gyroscopes may need
to be recalibrated. Do not attempt to do this
while flying, safely land the craft first and place
it on a flat surface. The craft and the remote
should already be linked together.
Pull down and to the right on both controls
sticks for 2-3 seconds. The remote will chime
once and the LEDs on the craft will blink
rapidly. When the LEDs have stopped blinking
the recalibration is complete and the craft is
ready to fly.
Remote Trim Reset
If you are still having difficulty flying, it may
help to reset the trim controls on the remote.
Do not attempt to do this while flying, safely
land the craft first.
Press the Reset button, the remote will chime
once to indicate that the trim has been reset
to default.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for GPX DR397-1903 Sky Rider Drone-osaur Quadcopter at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of GPX DR397-1903 Sky Rider Drone-osaur Quadcopter in the language / languages: English as an attachment in your email.

The manual is 3,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info