776255
11
Zoom out
Zoom in
Previous page
1/12
Next page
GMC-I Messtechnik GmbH 11
Electromagnetic Compatibility
Intrinsic Uncertainty
EN 61326-1:2006 class B
Intrinsic Uncertainty EN 61326:2006
Mechanical Design
Protection case: IP40
terminals: IP20
Extract from table on the meaning of IP codes
Dimensions 405 x 300 x 220 (mm)
with lid
Weight approx. 6.7 kg
Note!
Observe the technical data of the respective
test instrument.
9 Maintenance
Front Panel / Housing
No special maintenance is required for the
housing. Keep outside surfaces clean. Use only a
cloth for cleaning, which has been slightly
dampened with water. Avoid the use of cleansers,
abrasives and solvents.
Note!
According to DIN VDE 0701-0702,
measuring instruments used for periodic
testing must be tested and calibrated in
accordance with the manufacturer’s
specifications on a regular basis. Depending
upon usage, the manufacturer recommends
an interval of 1 to 3 years for this test
instrument.
Device Return and Environmentally Compatible Disposal
The instrument is a category 9 product
(monitoring and control instrument) in accordance
with ElektroG (German Electrical and Electronic
Device Law). This device is subject to the RoHS
directive. Furthermore, we make reference to the
fact that the current status in this regard can be
accessed on the Internet at
www.gossenmetrawatt.com by entering the
search term WEEE.
We identify our electrical and electronic
devices in accordance with WEEE 2012/
19/EU and ElektroG with the symbol
shown to the right per DIN EN 50419.
These devices may not be disposed with the
trash. Please contact our service department
regarding the return of old devices.
10 Repair and Replacement Parts Service,
Calibration Center and Rental Instrument Service
If required please contact:
GMC-I Service GmbH
Service-Center
Thomas-Mann-Str. 20
90471 Nürnberg • Germany
Phone: +49 911 817718-0
Fax: +49 911 817718-253
E-Mail service@gossenmetrawatt.com
www.gmci-service.com
This address is only valid in Germany.
Please contact our representatives or subsidiaries
for service in other countries.
11 Product Support
If required please contact:
GMC-I Messtechnik GmbH
Product Support Hotline
Phone: +49 911 8602-0
Fax: +49 911 8602-709
E-Mail support@gossenmetrawatt.com
IP XY
(1
st
digit X)
Protection against
foreign object entry
IP XY
(2
nd
digit Y)
Protection against the
penetration of water
0 not protected 0 not protected
1 50.0 mm dia. 1 vertically falling
drops
2 12.5 mm dia. 2
vertically falling
drops with enclo-
sure tilted 15°
3 2.5 mm dia. 3 spraying water
4 1.0 mm dia. 4 splashing water
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gossen Metrawatt AT3-III E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gossen Metrawatt AT3-III E in the language / languages: English as an attachment in your email.

The manual is 0.59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info