571662
2
Zoom out
Zoom in
Previous page
1/19
Next page
GOSSEN Foto- und Lichtmesstechnik GmbH 2
The basic functions are described in the operating instructions for the DIGISKY.
Preparation for use
Please ensure that you are familiar with the operation of your meter and that it is
providing consistent, accurate exposures before you commit to photographing
any unrepeatable material. We recommend you always carry out test exposures
prior to final image capture. Gossen assumes no liability for consequential
damages.
Copyrights
Gossen and DIGISKY are trademarks of Gossen Foto- und Lichtmeßtechnik
GmbH.
Adobe is a trademark of Adobe Systems Corporation.
Windows is a registered trademark of the Microsoft Corporation of the United
States of America in the USA and other countries.
Elinchrom is a registered trademark of elinchrom ltd., Switzerland
Prerequisites
DIGISKY with firmware version 2.01 or higher
If an older firmware version is installed to your DIGISKY, run a firmware update.
The Sky Refresh program and current firmware is available from the download
page at Gossen’s website: www.gossen-photo.de.
Updates can also be installed by Gossen in Nuremberg for a nominal fee to cover
our costs.
Radio receiver / studio flash unit with Elinchrom radio receiver (e.g. Universal
Receiver (speed), BX, RX etc.). An overview of compatible devices is included on
page 19 (last revised: date of issuance of these operating instructions).
For Elinchrom US versions (110V) only the triggering function is available
Operating Modes
The scope of functions coincides with Elinchrom’s description under the heading
“Direct Device Mode”.
Direct remote control of all Elinchrom RX studio flash units with integrated or
externally connected EL-Skyport radio receiver
Automatic detection of all Elinchrom RX studio flash units with integrated or
externally connected EL-Skyport radio receiver (receiver/transceiver)
Remote control of individual EL-Skyport studio flash units
Bidirectional communication between the DIGISKY and Elinchrom RX units and
modules
Automatic updating of studio flash settings
Multi-control function for “All Flash Units” and for “Flash Groups 1 ... 4”
Setup and storage of up to 3 studiosets (cam 1, cam 2, cam 3)
Separation of workstations (up to 8) via RF channels 1 through 8
Control of up to 6 studio flash units (RX and BX)
i
Users of elinchrom RX and BX series flashes are recommended to us the DIGISKY software
version 2.xx; this version includes the enhanced radio control functions for flash heads power
control.
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gossen DiGISKY Elinchrom at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gossen DiGISKY Elinchrom in the language / languages: English as an attachment in your email.

The manual is 1,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Gossen DiGISKY Elinchrom

Gossen DiGISKY Elinchrom User Manual - German - 19 pages

Gossen DiGISKY Elinchrom User Manual - Dutch - 19 pages

Gossen DiGISKY Elinchrom User Manual - French - 19 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info