354187
2
Zoom out
Zoom in
Previous page
1/14
Next page
141913
Instructions for Use
18
Before Putting Into Use
Before connecting the appliance to the mains
supply, place it on the location where it will later
on be installed and leave it for about 2 hours,
which will reduce a possibility of malfunctions in
the cooling system due to transport handling.
Clean the appliance, and be thorough,
especially in the interior (See Cleaning and
Maintenance).
In case the interior accessories are not
correctly placed, rearrange them as described
in chapter "Description of the Appliance".
Instructions for Use
These instructions for use are intended for the
user. They describe the appliance and its correct
and safe use. They were prepared for various
types of refrigerators therefore you might find in it
some functions that do not apply to your
appliance and description of the accesories that
your appliance does not include.
We Care for the Environment
Our products use environmentally friendly
packaging, which can be either recycled or
disposed of in an environmentally friendly
manner. To this end, individual packaging
materials are clearly marked.
These instructions are printed either on
recycled paper or chlorine free bleached paper.
When your appliance finally wears out, please
try not to burden the environment with it; call
your nearest authorised service agent. (See
Disposing of the Worn Out Appliance)
Tips for Energy Savings
Try not to open the door too often, especially
when the weather is wet and hot. Once you
open the door, mind to close it as soon as
possible. This is especially important if you
have an upright model.
Every now and then check if the appliance is
sufficiently ventilated (adequate air circulation
behind the appliance).
Use higher thermostat settings only when
required or recommended.
Before loading the appliance with packages of
fresh foods, make sure they are cooled to
ambient temperature.
Ice and frost layer increase energy
consumption, so do clean the appliance as
soon as the layer is 3-5 mm thick.
If the gasket is damaged or if it turns out that
the sealing is poor, the energy consumption is
substantially higher. To restore efficiency,
replace the gasket.
The condenser on the rear wall should be
always clean, free of dust or any impurities.
Always consider instructions stated in sections
Positioning and Energy Saving Tips, otherwise
the energy consumption is substantially higher.
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gorenje re 1247 baa at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gorenje re 1247 baa in the language / languages: English as an attachment in your email.

The manual is 0,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info