728756
29
Zoom out
Zoom in
Previous page
1/32
Next page
cover door can be adjusted to match
other fittings.
Make sure the area on which the
dishwasher is to be installed is firm.
Adjust the adjustable feet so that the
dishwasher is level.
If the dishwasher is built-in the
surrounding furnishings must be
resistant to any condensation from the
dishwasher.
Affix the protective film (packed in the
document bag) to the underside of the
worktop. The protective film is to protect
the worktop from moisture.
Check that the machine is installed
such that the door opens freely,
otherwise door lock functionality may
be disrupted.
Drainage connection
See the separate installation instructions
for necessary information.
This dishwasher is suitable for installing
in a raised recess (to attain an ergonomic
working height). This means that the
dishwasher can be placed so that the
drainage hose runs to a lower level than
the bottom of the dishwasher, such as by
routing it directly to a floor drain. The
dishwasher is fitted with an integrated
anti-siphon device to prevent the machine
from being emptied of water during the
wash cycle.
The drainage hose can also be connected
to a connection nipple on the sink unit's
water trap. The connection nipple must
have an internal diameter of at least 14
mm.
The drainage hose may be extended by
a maximum of 3 m (the total length of the
drainage hose must not exceed 4.5 m).
Any joins and connecting pipes must have
an internal diameter of at least 14 mm.
However, the drainage hose should ideally
be replaced with a new hose without joins.
No part of the drainage hose may be more
than 950 mm above the bottom of the
dishwasher.
Attach the drainage hose with a hose
clamp. Ensure that the drainage hose has
no kinks.
Connection to water supply
Use only the inlet hose supplied with the
dishwasher. Do not re-use old or other
spare hoses.
The supply pipe must be fitted with a
water tap (stopcock). The water tap must
be easily accessible, so that the water can
be shut off if the dishwasher has to be
moved.
Once the installation is complete, turn on
the water tap and allow the pressure to
settle for a while. Check that all
connections are watertight.
Connection to cold water supply
Connect the dishwasher to the cold water
supply if the building is heated using oil,
electricity or gas.
Connection to hot water supply
Connect the dishwasher to the hot water
supply (max. 70 °C) if the building is
heated using an energy-efficient means
such as district heating, solar power or
geothermal power. Choosing a hot water
connection cuts dishwashing times and
reduces the dishwasher's energy
consumption.
29
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gorenje GV6SY21B at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gorenje GV6SY21B in the language / languages: English as an attachment in your email.

The manual is 3,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info