335615
5
Zoom out
Zoom in
Previous page
1/9
Next page
Instructions for Use, Building- in and Connecting
26
Troubleshooting guide
Repairs may be done by qualified personnel only.
Any unskilled attempt to repair the appliance is
extremely dangerous.
Before attempting any repairs disconnect the
appliance from the mains by removing the fuse or
unplugging the mains lead from the mains socket.
Any unskilled attempts and/or repairs may cause
electric shock and short circuit. To avoid such
injuries any repairs may be performed only by
qualified personnel or after sales service.
Note
There are, however, some minor faults which
may be easily removed by the user, in
accordance with the instructions that follow.
Important
If the malfunction of the appliance was caused by
the improper use, the service visit during the
warranty period is not free of charge.
Keep these instructions always on hand and if
you sell the appliance hand them over to the
new user.
Following are some simple advice how to repair
minor faults:
Fault Cause Remedy
Burner flame is not steady. Wrong setting of gas. Expert should set the gas escape
properly!
Burner flame suddenly
changes.
Incorrect assembly of burner
components.
Assemble the burner components
correctly!
Ignition of burners takes
excessively long.
Incorrect assembly of burner
components.
Assemble the burner components
correctly!
The flame goes off after
ignition.
Early release of control button.
Control button is not pushed in
firmly.
Keep the button pressed longer.
Before releasing the button, give it
one final solid push.
The color of the cooking zone
gas grid has changed.
Normal situation, caused by the
high temperature.
Clean the grid with metal cleaning
agents.
Electric operations are
generally disturbed.
Fuse is burned. Check the fuse in the fuse box, and
replace if required.
Electric ignition of burners
does not function.
Food residues or detergent block
the contact between the ignition
device and the burner.
Open and clean carefully the
opening between the ignition
device and the burner.
Burner crown caps look ugly. Usual staining. Clean the crown cap with metal
cleaning agents.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gorenje gms 66 e at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gorenje gms 66 e in the language / languages: English as an attachment in your email.

The manual is 0,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info