603653
22
Zoom out
Zoom in
Previous page
1/24
Next page
492208
‘’ The appliances are suitable for photovoltaic electrical power
under the condition that electrical voltage will be 220VAC -
240VAC with semi tonic frequency 50Ηz in order the appliance
to operate properly (alternative a generator can be used with
the same technical characteristic).’’
Incorrect connection may destroy parts of the appliance,
making the warranty void.
Before connecting the appliance, make sure the voltage
indicated on the rating plate is consistent with the voltage
in your home network. Connection voltage (230 V through
N) should be checked by a quali ed technician using a
corresponding measuring device!
Connection cable on the back of the appliance should be led in
such way that it does not touch the appliance back wall, as this
part will get very hot during operation.
NOTE:
Connection bridges are already installed on their respective
places on the clip. Screws of the connection terminals are open,
which means they do not have to be unfastened or unscrewed
any further. When fastening the screws, you may hear a slight
‘click’, which means that the screws should be fastened /
screwed in completely.
The following can be used for connection:
Type H05 RR-F 4×1.5 rubber connection cables with a green-
yellow protective wire,
Type H05 VV-F 4x1,5 PCV insulated connection cables with
yellow-green protective wire, or other equivalent or superior
grade cables.
Connection diagram
ATTENTION!
Before any manipulation with the appliance (other than its regular use), disconnect it from the
power mains. The appliance should be connected according to the relevant scheme (diagram),
subject to the network voltage. Connect the earth (PE) wire to the clip indicated with the earth
/ground symbol.
The mains cord must be fed through the fastening clip / strain release device which protects it
from being pulled out accidentally.
After connecting the appliance, turn on all cookers for approximately three minutes to check their
operation.
22
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gorenje ECT693 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gorenje ECT693 in the language / languages: English as an attachment in your email.

The manual is 1,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info