Manual Gorenje ect 680 sc (page 2 of 13) (English)

335439

Zoom out

Zoom in

1/13

Instructions for use, mounting and connection

Connection to the power supply

• Connections may be carried out by a qualified technician only.

The earthing protection must comply with the standing

regulations.

• Connection terminals are revealed when the connection box

cover is removed.

• Prior any attempted connection check that the voltage indicated

on the rating plate is in line with your home power supply.

• The rating plate is located underneath the appliance.

• The appliance is manufactured for use with the power supply

voltage AC 230 V.

• The electric wiring should be equipped with a circuit breaker able

to isolate the appliance from the mains in all points, with the

distance between terminals of at least 3 mm in open position.

This may be done by means of fuses, safety switches, etc.

• The connection should be selected in accordance with the

declared charge capacity of the mains and the fuse power.

• Such appliances are allowed to be mounted on one side next to

a high kitchen cabinet, the height of which may exceed that of

the appliance. On the opposite side however, only a kitchen

cabinet of equal height as the appliance is allowed.

• Upon the completion of installation, live wires and isolated cables

must be adequately protected against accidental touching.

• Distance between the cooktop surface and the cooking hood

must be such as indicated in the instructions for use of the hood.

• Kitchen cabinets may not be mounted underneath the built-in

ceramic-glass cooktop.

Basic adjustment of sensors to the ambience

Upon each connection to the power supply the sensors of the

appliance are automatically adjusted to the environment to

ensure their proper function. All displays indicate the sign "-".

Once the successful adjustment is completed it is signaled with

a beep, all displays are switched off and your cooktop is ready

for use.

During the adjustment procedure the sensors must be free of

any objects, otherwise the adjustment procedure will be

interrupted until such objects are removed from the sensor

surface. During this period the regulation of the cooktop is

impossible.

ATTENTION !

Before attempting any repairs on the appliance, disconnect the

power supply. In accordance with the mains voltage the

appliance should be connected in line with the attached

diagram. The earthing wire (PE) must be connected to the

terminal marked with the earthing symbol

The connection cable must lead through the relief safety

device, protecting it from accidental pulling out.

Upon the completion of installation switch all the hotplates on

for about 3 minutes to check the proper functioning.

Installation diagram

NOTE

In some connection boxes the connector bridges are placed between contacts 4 and 5, and in the others they are stored at a

designated place within the box. These boxes have the connection screws already in open position so they need not be unscrewed.

Connection may be carried out by means of:

− rubber coated connection cables, model H05 RR-F 4x1,5 with yellow-green earthing cable;

− PVC insulated connection cables, model H05 VV-F 4x1,5 with yellow-green earthing cable; or

− any other suitable cables.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Gorenje ect 680 sc in the language / languages: English as an attachment in your email.

The manual is 1,24 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Gorenje ect 680 sc

Gorenje ect 680 sc User Manual - German - 24 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Gorenje ect 680 sc Manual

Product: