335437
3
Zoom out
Zoom in
Previous page
1/18
Next page
Instructions for use, mounting and connection
42
Basic adjustment of sensors to the
ambience
Upon each connection to the power supply the
sensors of the appliance are automatically adjusted to
the environment to ensure their proper function. All
displays indicate the sign "-".
Once the successful adjustment is completed it is
signaled with a beep, all displays are switched off and
your cooktop is ready for use.
During the adjustment procedure the sensors must be
free of any objects, otherwise the adjustment
procedure will be interrupted until such objects are
removed from the sensor surface. During this period
the regulation of the cooktop is impossible.
ATTENTION !
Before attempting any repairs on the appliance,
disconnect the power supply. In accordance with the
mains voltage the appliance should be connected in
line with the attached diagram. The earthing wire (PE)
must be connected to the terminal marked with the
earthing symbol
.
The connection cable must lead through the relief
safety device, protecting it from accidental pulling out.
Upon the completion of installation switch all the
hotplates on for about 3 minutes to check the proper
functioning.
Installation diagram
NOTE
In some connection boxes the connector bridges are placed between contacts 4 and 5, and in the others they are
stored at a designated place within the box. These boxes have the connection screws already in open position so
they need not be unscrewed. During the tightening procedure you will hear a faint “click”, meaning that the
tightening screw should be fastened tightly all the way
Connection may be carried out by means of:
rubber coated connection cables, model H05 RR-F 4x1,5 with yellow-green earthing cable;
PVC insulated connection cables, model H05 VV-F 4x1,5 with yellow-green earthing cable; or
any other suitable cables.
Mounting the built-in cooktop
Caution !
To avoid any possible hazard, the appliance may
be installed by qualified personnel only.
Panels and furniture lining of the kitchen cabinet
receiving the hob must be treated with
temperature resistant adhesives (100°C),
otherwise they might be discoloured or deformed
because of inadequate temperature resistance.
The cooking hob is intended for building into the
worktop above the kitchen element of 600 mm
width or more.
After the installation of built-in hob make sure that
there is free access to the two fixing elements in
front.
Suspended kitchen elements above the cooktop
must be installed at such distance to provide
enough room for comfortable working process.
The distance between the worktop and the hood
must be at least such as indicated in the
instructions for installation of the kitchen hood, but
in no case it may be less than 650 mm.
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gorenje ect 680 al at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gorenje ect 680 al in the language / languages: English as an attachment in your email.

The manual is 1,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Gorenje ect 680 al

Gorenje ect 680 al User Manual - German - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info