330551

Gorenje b 7580 e Manual

3
Zoom out
Zoom in
Previous page
1/14
Next page
Instructions for use, installation and connection
36
Prior first use
Oven
Take all the accessories out of the oven and clean it with warm
water and your usual mild detergent. Never use aggressive
cleaners as they might cause scratches!
During the first heating the oven might produce a somewhat
unpleasant smell of a new product. This is normal, just
ventilate the place thoroughly!
Tips for the use of oven
• If possible use dark, silicone coated or enamel baking pans,
because of their excellent thermal conductivity.
• Preheating of oven is necessary only if recommended by the
recipe or if written in the chart below.
• Heating of empty oven consumes a lot of energy. Save it by
baking several pizzas or cakes consecutively, one after the
another, while the oven is still warm from the previous
one.Towards the end of baking, the oven may be switched
off about 10 minutes before the pletion, thereby making use
of the remaining.
Oven
Electronic program clock with temperature display
1
2
3
45
S3
S1
S2
S4
1
2
3
45
S3
S1
S2
S4
1 – Timer
2 – Period of operation
3 – End of operation
4 –Reset
5 – Setting button (+) and (-) (certain models only)
Note: This button is operated the following way: to increase
settings (+) turn it to the right and hold in that position, and to
decrease settings (-) turn it to the left and hold!
Setting the time of day
After connecting the appliance to the mains, the display
indicates flashing zeros (0.00) and AUTO. Press buttons (2)
and (3) at the same time (and release them). When symbol
(S4) starts flashing, use button (5) to set the exact time of day.
When the symbol (S4) stops flashing, the clock starts running.
After setting the time of day, the clock is ready for operation.
Semi-automatic mode with defined period of operation
Press button (2). Display indicates 0.00 and flashing 'AUTO'
(symbol (S3)). Use button (5) to set the desired period of
operation. Time can be set in 1 minute periods. Maximum
preset period of operation is 10 hours.
When the desired time is set after a few seconds the symbol
‘AUTO' stops flashing and the countdown begins. The display
indicates oven temperature. By pressing the button (2) you can
check the remaining time and correct it if required. When the
countdown is completed, a beep is heard (symbol 'AUTO' is
flashing). The oven is automatically shut off and the preset
temperature is erased!
Sound signal is switched off automatically after 5 minutes, if it
is not stopped before by pressing any button (symbol ‘AUTO’
goes off).
Semi-automatic mode with preset end of operation
Press button (3) and the display indicates time of day along
with flashing 'AUTO'. Use button (5) to set the end of operation
time (this must naturally be more than the actual time of day).
Once the end time is set, the symbol 'AUTO' stops flashing
after a few seconds, and the display indicates oven
temperature.
When the time of day reaches the preset end time of roasting,
sound signal indicates the end of operation (symbol 'AUTO' is
flashing). Oven is automatically switched off and the preset
temperature is deleted!
Sound signal is switched off automatically after 5 minutes, if it
is not stopped before by pressing any button (symbol ‘AUTO’
goes off).
Automatic mode with preset period and end of
operation
Press button (2) and use button (5) to set the desired time.
Then press button (3) and the display indicates the nearest
possible time of the end of operation.
Symbol (S2) goes off and 'AUTO' is on if the end time is higher
than the actual time of day + period of operation. Oven is in the
stand-by mode and starts operating automatically according to
the preset times.
Example:
Time of day = 12:00, operation period is set to 1:30, end of
operation at 14:00. This means that oven will start working at
12:30.
Timer
Timer is used to perform only the signaling function, and it
does not switch the oven off.
By pressing button (1) display indicates 0.00 and (S1) is
flashing. Use button (5) to set the desired time. After a few
3 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gorenje b 7580 e at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gorenje b 7580 e in the language / languages: English as an attachment in your email.

The manual is 0,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info