669682
24
Zoom out
Zoom in
Previous page
1/25
Next page
46 47
MY GOPRO WON’T POWER ON
Make sure the camera’s battery is charged or the array is connected to an
external power supply.
OMNI UNEXPECTEDLY POWERS OFF
Omni might unexpectedly power off for a number of reasons:
Insufficient power to the array from an external power supply
Insufficient power to the array from the camera batteries
Insufficient, incorrect, or excessive voltage/amperage from an external
power supply
Missing camera from the array
Camera without array camera firmware
Fully depleted or nearly depleted camera battery
Full microSD cards (no action was taken when SD CARD FULL message
appeared on a camera)
CAMERAS IN OMNI WON’T RECORD
Check the cameras for errors:
If the primary camera has a problem, the camera status screen
displays a message describing the problem. For more information,
see Important Messages (page 44).
If one of the secondary cameras has a problem, the primary camera
displays Array Error and the camera status light on the primary camera
flashes rapidly. For more information, see Array Error (page 44).
MY OMNI ISN’T BEHAVING AS EXPECTED
This issue is often caused by switching from one power source to another
when the camera is powered on. To switch from camera batteries to
external power (or external power to batteries), you must first power off
the camera.
Omni takes a moment to recognize the external voltage being supplied.
Without camera batteries installed, Omni might not respond to a
rapid attempt to power up, if the external power supply was not
yet recognized.
With camera batteries, a rapid power up might lead to the camera
batteries initially powering up the Omni and then switching over to the
external power.
To prevent these situations, wait a moment after connecting the external
power before powering up Omni.
Note: When camera batteries are installed, check the camera status lights to determine
if the external power is recognized. Unless the camera batteries are fully charged, the
status lights illuminate after the external power is recognized.
MY GOPRO WON’T RESPOND WHEN I PRESS A BUTTON
Press and hold the
Power/Mode button [
] for 8 seconds to reset your
camera. This reset saves all of your content and settings, and powers off
your camera.
I WANT TO RESET MY GOPRO SETTINGS TO THE DEFAULTS
In Setup mode, select Camera Reset, and then select Reset Defaults.
This option does not reset the Date/Time.
I POWERED OFF MY GOPRO, BUT THE BLUE LIGHT IS
STILL BLINKING
The blue light indicates that Wireless is on. To turn off Wireless, go to
Setup mode. Press the Shutter/Select button [
] to select Wirleless,
then press it again to turn Wireless off.
For more answers to commonly asked questions, see
gopro.com/help.
TROUBLESHOOTING TROUBLESHOOTING
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for GoPro Omni at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of GoPro Omni in the language / languages: English as an attachment in your email.

The manual is 0,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of GoPro Omni

GoPro Omni User Manual - German - 27 pages

GoPro Omni User Manual - French - 27 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info