Manual Golmar Stadio Plus T500EN (page 4 of 18) (English)

655051

Zoom out

Zoom in

1/18

DOOR PANEL INSTALLATION

To assembly the EL516 encoder, screw the top tab

of the case to the corresponding plastic lug

of the embedding box.

In case of more than one encoder, place them underneath

or in the next embedding box.

The use of EL516 encoders is only necessary for panels

with more than 8 push buttons.

Each encoder allows to connect 15 push buttons,

obtaining a maximum of 120 push buttons by using

8 encoders.

lace the embedding

box.

Pass the wiring through the hole made in the bottom part

of the embedding box. Level and flush the embedding

box. Once the embedding box is placed, remove the

protective labels from the attaching door panel holes.

ssembly the door panel

modules.

Insert the header DOWN marked in the lower module and fix it by screwing the module

shafts.

Place the module spacer between lower and next modules, assuring that the spacer

adjustment notches are inside the panel. Fix the module by screwing the shafts.

Repeat this procedure in case of door panels with one more module (the maximum

number of modules placed vertically is three).

Insert the header UP marked in the last module and fix it by screwing the supplied screws.

ssembly the sound module.

Insert the sound module in the grille module.

For a proper assembly, align the light

push button and the microphone rubber

of the sound module with its corresponding

holes in the grille module.

ssembling the EL500 microprocessed

circuit and the EL516 push buttons

The EL500 circuit is to be assembled on the top

of the embedding box. Insert the circuit in

the top flanges of the embedding box (1).

Push-in the circuit in the bottom flanges (2)

by pressing the pcb board.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Golmar Stadio Plus T500EN in the language / languages: English as an attachment in your email.

The manual is 5,14 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Golmar Stadio Plus T500EN Manual

Product: