467618

Golmar Platea Uno Manual

4
Zoom out
Zoom in
Previous page
1/6
Next page
MONITORS PROGRAMMING
5
6
TELEPHONE DESCRIPTION
Set to ON the switch number 2 of the configuration dip switch, that's
accessible by opening the terminal connector protection cover
(see door panel instructions manual).
The door panel will reproduce a sound to advise that the system
has entered into programming mode.
In systems with more than one door panel, the programming process
shall be done on the master door panel only.
rogramming the monitors.
P
Switch off the monitor to be programmed, by pressing
the lock release push button during 1 second.
Once the monitor is off, press the autoswitch-on push button.
While pressing the autoswitch-on push button,
press the lock release push button.
To show that the system is ready for programming,
the door panel will reproduce a sound and the picture
will appears on the monitor. At this moment, the
push buttons can be released. Lift the monitor handset.
Press the door panel push button that will
call to this monitor. At this moment
the door panel and the monitor handset
will reproduce a sound.
To program the monitor as master,
replace the monitor handset.
To program it as slave, press the lock
release push button.
Each apartment must have one master unit only; in case of parallel units configure them
as slaves, both monitors or telephones.
Make a call to check that the monitor has been succesfully programmed.
Repeat these steps to program the rest of monitors.
Once the programming has been finished, set to OFF the programming
switch. If you don't, the door panel will reproduce a sound to advise
that the system is still into programming mode.
a.
b.
c.
d.
e.
f.
g.
a
d
c
e
b
e
f
g
unction push button.
F
During call reception and communication progresses allows the lock release activation,
with no dependence on the handset position.
During stand-by condition and with the handset lifted, allows to call to the master
porter's exchange.
HZ-
+ , :
A :
D :
HZ- :
–
A D
+
_
escription of the T-940 Uno telephone.
D
Telephone handset.
Speaker grille.
Microphone hole.
Subjection hole.
Telephone cord connectors.
Function push button.
Hook switch.
erminal connector description.
T
positive, ground.
audio communication.
digital communication.
door bell push button input.
4


Need help? Post your question in this forum.

Forumrules
1

Forum

golmar-platea-uno

Reset search

  • I have a Golmar Platea Uno. It does not produce any ringing sound when you press the front door button Submitted on 4-5-2024 at 17:43

    Reply Report abuse

  • I have Platea Uno and the ring bell doesn’t work, the rest are ok, any experience why is that? Submitted on 4-5-2024 at 17:41

    Reply Report abuse

  • how do you reduce the volume of the bell, so it does not ring so loud?? Submitted on 20-4-2023 at 17:36

    Reply Report abuse

  • how do you reduce the volume of the bell, so is not so loud???? Submitted on 20-4-2023 at 17:34

    Reply Report abuse

  • Somehow pushed the wring button and it stopt working. How to reset the intercom?
    Submitted on 27-7-2021 at 09:08

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Golmar Platea Uno at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Golmar Platea Uno in the language / languages: English as an attachment in your email.

The manual is 0,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Golmar Platea Uno

Golmar Platea Uno User Manual - Dutch - 1 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info