GM Electronics Ltd.
Golden Mask Deep Hunter pro2 – Instruction Manual
11. If after lifting the antenna from the ground indicator "SIGNAL" show a
negative value (arrow deviates to the left of zero), this means that under the
antenna was metallic object during the preparation of the unit to work.
In such a case - move the antenna to another location, turn on the device again
and do again initial settings (item 4), then press briefly button "RETUNE"
and continue the search.
12. Please leave the detector switched “On” for about 15 minutes in the area of
work before it can be used to search for metal objects. During this time the
electronics are "self-adjust" to the ambient temperature and the detector reaches
optimum operation.
13. Do not attempt to use the detector after tripping indication consumed charge
the built-in battery. This can result in damage to electronics.
14. Always keep the electronics clean from dust, moisture and fat. Use only dry
and soft cotton cloth for cleaning.
15. If you use the detector in areas where it is possible presence of buried
weapons and/or explosives provide all precautions because the manufacturer
and dealers are not responsible for the consequences resulting from such use
of the detector.
16. If you are looking for metal objects in areas where it is possible to be laid
underground lines on the grid - must call the relevant authorities responsible for
the maintenance of these lines or perform excavation without their permission.
