Automatic Ground Balance
Golden Mask has made ground balancing easy for you to do. Find a
clean patch of ground free of metallic objects then press the GB
(ground balance) button, while the coil is off the ground and select
AUTO, you now will see the GB numbers on the VDI.
Start to raise and lower the coil from 9 inches to 1 inches off the
ground (also known as pumping the coil)
You will now hear and see the numbers alter on the VDI and then
settle after short period of raising and lowering the coil.
Once the audio has settled and the numbers have stabilised then you
have ground balanced the machine so press ENTER.
MANUAL GROUND BALANCE
this time you need to select MANUAL after pressing the GB button.
Same again you raise and lower the coil but this time you alter the
ground balance yourself by pressing the - and + buttons.
You are trying to eliminate ground minerals so adjust the numbers
until the machine is not sounding off while pumping the coil from 9 to
1 inch off the ground.
Once your machine is silent or as near to silent as you can get it while
pumping the coil up and down then press ENTER and you have now
completed the manual ground balance phase.
