656020
14
Zoom out
Zoom in
Previous page
1/14
Next page
Caring for Flash Trigger
Avoid sudden drops. The device may fail to work after strong shocks, impacts, or excess
stress.
Keep dry. The product isn't water-proof. Malfunction, rust, and corrosion may occur and go
beyond repair if soaked in water or exposed to high humidity.
Avoid sudden temperature changes. Condensation happens if sudden temperature changes
such as the circumstance when taking the transceiver out of a building with higher temperature
to outside in winter. Please put the transceiver in a handbag or plastic bag beforehand.
Keep away from strong magnetic field. The strong static or magnetic field produced by
devices such as radio transmitters leads to malfunction.
Technical Data
- 47 -
- 48 -
Technical Data
X1N
For Nikon
Nikon DSLR cameras (i-TTL autoflash)
Support for the cameras that have PC sync socket.
2.4G Wireless Transmission
MSK
2*AA batteries
Yes
i-TTL
Model
Type
Compatible Cameras
Builted-in remote system
Modulation mode
Power supply
Exposure Control
Manual flash
TTL autoflash
Yes (0~10ms, use 100us as the unit)
Receiver can control camera shooting through 2.5mm sync port
Adjust the flash's focal length through the transmitter
Wide LCD panel, backlight on/off
Transmitter: use a PC cord to input and output
Receiver: use a 2.5mm sync cord to output
Use the Micro USB port to upgrade
Settings will be stored 2 seconds after last operation and
recover after a restart
72x75x52(mm)/100g
70x65x47(mm)/70g
Others
Synchronization delay set
Wireless shutter release
ZOOM setting
LCD panel
Output interface
Firmware upgrade
Memory function
Dimension/Weight for Transmitter
Dimension/Weight for Receiver
Yes
Yes, ±3 stops in 1/3 stop increments
Yes
Manual open
Yes (AD360II/TT685N as receiver)
Yes (setting on the camera)
Yes, fired with camera's depth-of-field preview button
Compatible with Nikon CLS (Creative Lighting System)
Max. 6 groups (M/A/B/C/D/E)
>100m
32
TTL Control
High-speed sync
Flash exposure compensation
Flash exposure lock
Focus assist
Multi Flash
Second curtain sync
Modeling flash
Wireless Flash
Wireless function
Controllable slave group
Transmission range(approx.)
Channel
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Godox X1N at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Godox X1N in the language / languages: English as an attachment in your email.

The manual is 5,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info