656020
11
Zoom out
Zoom in
Previous page
1/14
Next page
GR
CH
Setting the Receiver
4. The channel amount will increase from 1 to 32. When the current channel is 32, press the
<CH> Button again and the channel 1 will be displayed on the panel.
Group Settings
1. Short press the <GR> Button and the group
amount will increase a step each time.
2. Long press the <GR> Button will enter quicker
adjustment mode. The group amount will increase
fast in this mode.
3. Release the <GR> Button and the current group
amount is confirmed.
4. The group amount will increase from A to E. When
the current group is E, press the <GR> Button
again and the group A will be displayed on the
panel.
Automatically Enter Power Saving Mode
1. The system will go into standby mode after the transmitter goes into standby mode. And the
displays on the LCD panel disappear now.
2. To wake up the system, press the <TEST> Button or the <GR> Button. Fully press the
<TEST> Trigger Button of the transmitter can also wake up the receiver’s system. If the
transmitter is attached to the NIKON DSLR camera, half press the camera shutter can also
wake up the system.
Selecting the Operation Method
Button
CH/OK
GR
MODE
Transmitter:
X1N Operation Method 1(by default
TTL/M Mode
Operation
Short press
Double-click
Long press for
2 seconds
Long press for
5 seconds
Short press
Long press for
2 seconds
Short press
Status
Normal
Set the channel
Set the group
Select
Dial
Function
(under normal status)Enter CH settings; (under settings)Confirm and back to
normal status
Control the ON/OFF of modeling flash
Enter C.Fn custom settings
Switch the Operation Methods (Method 1/Method 2)
Select the POWER/FEC settings
Select all the group
(under normal status) Switch the < Group> mode (TTL/M/OFF)
Function
Set the < Group>
Adjust the channel amount
Adjust the group’s POWER/FEC amount
- 41 - - 42 -
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Godox X1N at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Godox X1N in the language / languages: English as an attachment in your email.

The manual is 5,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info