656031
22
Zoom out
Zoom in
Previous page
1/22
Next page
Troubleshooting
If there is a problem, refer to this Troubleshooting Guide.
The Camera Flash does not fire.
The camera flash is not attached securely to the camera.
Attach the camera’s mounting foot securely to the camera.
The electrical contacts of the Camera Flash and camera are dirty.
Clean the contacts.
< > or < > is not displayed in the view finder of camera.
Wait until the flash is fully recycled and the flash ready indicator
lights up.
If the flash ready indicator lights up, but < > or < > is not
displayed in the view finder, check whether this flash unit is
securely attached to the camera hotshoe.
If the flash ready indicator does not light up after a long wait,
check whether the battery power is enough. If the battery power
is low, < > will appear and blink on the LCD panel. Please
replace the battery immediately.
The power turns off by itself.
After 90 seconds of idle operation, auto power off took effect if the
flash is set as master.
Press the shutter button halfway or press any flash button to
wake up.
After 60 minutes (or 30 minutes) of idle operation, the flash unit
will enter sleep mode if it is set as slave.
Press any flash button to wake up.
Auto zoom does not work.
The camera flash is not attached securely to the camera.
Attach the camera flash’s mounting foot to the camera.
The flash exposure is underexposed or overexposed.
There was a highly reflective object (e.g. glass window) in the
picture.
Use FE lock (FEL).
You used high-speed sync.
With high-speed sync, the effective flash range will be shorter.
Make sure the subject is within the effective flash range
displayed.
You used Manual Flash mode.
Set the flash mode to ETTL or modify the flash output.
Photos have dark corners or only parts of the target subject
are illuminated.
The focal length of lens exceeds the flash coverage.
Check the flash coverage you set. This flash unit has the flash
coverage between 20 and 200mm, which fits medium-format
cameras. Pull the wide panel out to extend the flash coverage.
Firmware Upgrade
This flash supports firmware upgrade through the USB port. Update
information will be released on our official website.
USB connection line is not included in this product. The USB
port is a standard Micro USB socket. Common USB
connection line is applicable.
Compatible Camera Models
This flash unit can be used on the following
Canon EOS series camera models:
This table only lists the tested camera models, not all Canon
EOS series cameras. For the compatibility of other camera
models, a self-test is recommended.
Rights to modify this table are retained.
Shut down the device immediately should abnormal operation be
detected.
Avoid sudden impacts and the product should be dedusted
regularly.
It is normal for the flash tube to be warm when in use. Avoid
continuous flashes if unnecessary.
Maintenance of the flash must be performed by our authorized
maintenance department which can provide original accessories.
This product, except consumables e.g. flash tube, is supported
with a one-year warranty.
Unauthorized service will void the warranty.
If the product had failures or was wetted, do not use it until it is
repaired by professionals.
Changes made to the specifications or designs may not be
reflected in this manual.
Maintenance
5D Mark III 5D Mark II
6D
7D
60D 50D 40D
30D
650D 600D 550D 500D 450D
400D Digital
1100D 1000D
1DX
- 81 - - 82 -
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Godox V860IIC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Godox V860IIC in the language / languages: English as an attachment in your email.

The manual is 17,14 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info