656067
4
Zoom out
Zoom in
Previous page
1/5
Next page
Body
1. Sync Cord
2. Power Cord
3. Instruction Manual
Accessories
1. Power Socket 2. Sync Cord Jack 3. Power Switch 4. Flash Output Controller
5. Optical Control and Anti-Preflash Switch 6. Modeling Lamp Switch 7. Buzz Button
8. Test Button 9. Flash Output Level Indicator 10. Slave Trigger Indicator
11. Modeling Lamp Indicator 12. Buzz Indicator 13. Charging Indicator Lamp
14. Fuse 15. Mounting Bracket 16. Umbrella Input 17. Light Sensor
Flash Preparation
Test Button
Attach the flash unit on an
appropriate light stand.
Adjust the mounting bracket
(15) for a good angle and
make sure it's tightened and
fixed.
The umbrella input (16) is
applicable for any studio
umbrella.
Power Connection
Connect the flash to an AC power source via power cord and turn on the power
switch (3). The charging indicator lamp (13) remains off, indicating the unit is
charging, no flash at this moment. When the unit is ready to fire, the charging
indicator lamp (13) is on.
Flash Output Control
Flash output controller (4) controls the power radio, adjustable power from 1/8
to full.It can meet customers' requirements for light in different environment.
(Note: When adjusting the power from full power to a lower setting, press the
test button to release the power in the capacitor, so when recharged, the flash
output will be in the corresponding setting.)
To fire the flash without taking a picture, push the test button. It will also adjust
the brightness when combined with the flash output controller (4).
Sync Triggering
The sync cord jack (2) is
a Φ3.5mm mini plug.
When working with sync
cord triggering method,
insert one end of sync
cord or a trigger plug
into it; the flash then
can be fired synchronously.
1 2
17
4
1
5
2
3
8
6
10
16
15
7
13
12
11
14
9
Names of Parts
Operations
05
06
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Godox Smart 300SDi at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Godox Smart 300SDi in the language / languages: English as an attachment in your email.

The manual is 2,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info