656048
3
Zoom out
Zoom in
Previous page
1/5
Next page
- Do not touch the two terminals of the tube outlet as there is high voltage inside. Wear
insolated gloves before replacing the tube or modeling lamp.
- Avoid sudden impacts as this can damage the flash tube and/or modeling lamp.
- Do not flash directly towards naked eyes (especially those of babies), otherwise it may
lead to visual impairment.
- Disconnect from the power supply when it will not be used for an extended period.
Body
NAMES OF PARTS
1. AC Power Socket 8. Slave Model Button SLAVE 15. Light Sensor
2. Sync Cord Jack 9. Test Button 16. Fuse
3. Power Switch 10. Digital Display 17. Mounting Bracket
4. Modeling Lamp Output Controller 11. Modeling Lamp Indicator 18. Umbrellas Input
5. Flash Output Controller 1 2 . B u z z I n dicator 19. Direction Adjusting Handle
6. Modeling Lamp Button MODEL 13. Slave Trigger Indicator 20. Wireless Control Port
7. Sound Button 14. Test Indicator Lamp
1. Sync Cord
2. Power Cord
3. Standard Reflector
4. Lamp Cover
5. Glass Protection Cover
6. Modeling Lamp
7. Instruction Manual
Accessories
- 03 -
Separately sold accessories
The product can be used in combination with the following accessories sold separately, so as to
achieve best photography effects:
FT-16 Remote Control, Power Inverter, Softbox, Photographic Umbrella, Light Stand,
Barndoor, Snoot, etc.
OPERATIONS
Flash Preparation
1. Take down the lamp cover.
Install the modeling lamp and put
on the glass protection cover and
the standard reflector.
(To uninstall the standard
reflector, press the orange
release button on the flash head
and turn the standard reflector
counter-clockwise to take it out, as illustrated in the picture.)
2. Attach the flash unit on an appropriate light stand. Adjust the mounting bracket (17) for a
good angle and make sure it’s tightened and fixed. Use the direction adjusting handle (19) to
adjust the flash on a desired direction. Umbrella input (18) is for different photo umbrellas to put
in.
- 04 -
15
04
01
07
02
08
19
14
09
10
03
05
06
11
12
16
17
13
18
20
1
2
3
4
5
6
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Godox Quicker at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Godox Quicker in the language / languages: English as an attachment in your email.

The manual is 2,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info