656049
3
Zoom out
Zoom in
Previous page
1/5
Next page
15
04
01
07
02
08
19
14
09
10
03
05
06
11
12
16
17
13
18
Body
NAMES OF PARTS
01. AC Power Socket 11. Modeling Lamp Indicator
02. Sync Cord Jack 12. Buzz Indicator
03. Power Switch 13. Slave Triggering Indicator
04. Modeling Lamp Output Controller 14. Test Indicator Lamp
05. Flash Output Controller 15. Light Sensor
06. Modeling Lamp Button 16. Fuse
07. Sound Button 17. Mounting Bracket
08. Slave Model Button 18. Umbrella Input
09. Test Button 19. Direction Adjusting Handle
10. Digital Display 20. Wireless control port
1. Sync Cord
2. Power Cord
3. Standard Reflector
4. Lamp Cover
5. Glass Protection Cover
6. Modeling Lamp
7. Instruction Manual
Accessories
- 03 -
Separately sold accessories
The product can be used in combination with the following accessories sold separately,
so as to achieve best photography effects:
Power Inverter, Softbox, Photographic Umbrella, Light Stand, Barndoor, Snoot, etc.
OPERATIONS
Flash Preparation
Power Connection
Modeling Lamp
1. Take down the lamp
cover. Install the modeling
lamp and put on the glass
protection cover and the
standard reflector.
(To uninstall the standard
reflector, press the blue
release button on the flash
head and turn the standard
reflector counter-clockwise
to take it out, as illustrated in the picture.)
2. Attach the flash unit on an appropriate light stand. Adjust the mounting bracket (17)
for a good angle and make sure it is tightened and fixed. Use the direction adjusting
handle (19) to adjust the flash to a desired direction. Umbrella input (18) is for different
photographic umbrellas to put in.
Use the power cord to connect the flash to an AC power source and turn on the power
switch (3). The lamp on the power switch turns on, indicating it’s connected.
Modeling lamp button (6) controls the modeling lamp status: Modeling lamp indicator
(11) is on, indicating the modeling lamp is on; Modeling lamp indicator (11) is off,
indicating the modeling lamp is turned off. Modeling lamp output controller (4) can be
used to adjust the modeling lamp power output. Modeling lamp will be off automatically
after lighting for 2 hours, in case overheating occurs when user is not nearby to turn it
off.
- 04 -
5
4
3
2
1
6
20
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Godox Quicker D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Godox Quicker D in the language / languages: English as an attachment in your email.

The manual is 2,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info