656045
5
Zoom out
Zoom in
Previous page
1/9
Next page
The flash output is adjustable from 1/1 full power to 1/128th power in 0.1 stop increments. To obtain a correct flash
exposure, use a hand-held flash meter to determine the required flash output.
Display Flash Duration
Flash duration refers to the length of time that from flash’s firing to reach the half peak at maximum. The half peak
at maximum is usually expressed as t=0.5. In order to provide the photographer with more concrete data, this
product adopts t=0.1. The difference between t=0.5 and t=0.1 is shown in the following picture.
mask
sec
to.1
speed
Multi
CH
S
%
- 21 - - 22 -
Name of Parts
LCD Panel:
Radio (2.4G) Transmission
Group
Channel
High-Speed Flash Mode
Flash Duration
S1/S2
HSS
Flash Output
Over-Temperature
Protection Icon
Beep
Mask
Delay Flash
1Power Cord 2Standard Reflector 3Lamp Cover 4Glass Protection Cover 5Modeling Lamp
6Instruction Manual
Accessories
1 2 3
4
5
The product can be used in combination with the following accessories sold separately, so as to achieve best
photography effects:
X1 TTL Flash Trigger, Power Inverter, Softbox, Photographic Umbrella, Light Stand, Barndoor, Snoot, etc.
Separately Sold Accessories
M: Manual Flash
A
t
50%
10%
t=0.5
t=0.1
Flash duration will only be displayed in the M mode.
Operations
Flash Preparation
1. Take down the lamp cover. Install the modeling lamp and put on the glass protection cover and the standard
reflector. (To uninstall the standard reflector, press the orange release button on the flash head and turn the standard
reflector counter-clockwise to take it out, as illustrated in the picture.)
2. Attach the flash unit on an appropriate light stand. Adjust the mounting bracket for a good angle and make sure it’s
tightened and fixed. Use the direction adjusting handle to adjust the flash on a desired direction. Umbrella input is for
different photo umbrellas to put in.
Press <MODE> button so
1 that <M> is displayed.
Turn the Select Dial to choose
2 a desired flash output amount.
Multi Flash
Light Brightness of
Modeling Lamp
mask
sec
to.1
speed
Multi
CH
S
%
maskmaskmask
secsecsec
to.1
speed
M
M
ulti
ultiMulti
CH
S
SS
%
mask
sec
to.1
speed
Multi
CH
S
%
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Godox Quicker 400 IIM at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Godox Quicker 400 IIM in the language / languages: English as an attachment in your email.

The manual is 5,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info