656023

Godox AR400 Manual

6
Zoom out
Zoom in
Previous page
1/7
Next page
- 21 - - 22 -
To avoid overheating or deteriorating the flash head, the over-temperature protection
function will be activated automatically after 10 continuous high-speed flashes and the
recycle time becomes 10s longer.
8. LED Light Control
Press the LED Light Control Button (14) to control LED light: Off→30%→70%→100%→
Off……
When the LED light is turned on, the icon is shown on the LCD display.
Protection Function
Over-Temperature Protection
To avoid overheating and deteriorating the flash head, do not fire more than 40
continuous flashes in fast succession at 1/1 full power. After 40 continuous flashes, allow a
rest time of at least 10 minutes.
If you fire more than 40 continuous flashes and then fire more flashes in short intervals,
the inner over-temperature protection function may be activated and make the recycling
time about 10 to 15 seconds. If this occurs, allow a rest time of about 10 minutes, and the
flash unit will then return to normal.
When the over-temperature protection is started, is shown on the LCD display.
Number of flashes that will activate over-temperature protection:
Power Output Level
1/1
1/2+0.7
1/2+0.3
1/2
1/4(+0.3/+0.7)
1/8(+0.3/+0.7)
1/16(+0.3/+0.7)
1/32(+0.3/+0.7)
1/64(+0.3/+0.7)
1/128(+0.3/+0.7)
Number of Flashes (Approx.)
40
60
80
100
200
300
400
400
500
500
Power Output Level
1/1
1/2
1/4
1/8
1/16
1/32
Number of Flashes (Approx.)
10
15
20
30
40
50
Number of flashes that will activate over-temperature protection in high-speed sync
triggering mode:
7. Hi-Speed Sync Triggering
To enter mode, press both Mode Selection Button (16) and LED Light Control Button(14).
Press Mode Selection Button (16) again to exit mode.
In hi-speed sync triggering mode, you can use a hi-speed sync trigger to have your flash
unit synchronize with all shutter speeds of cameras(max. 1/8000 second, up to your
camera). This is convenient when you want to use aperture- priority for fill-flash portraits.
Note:
Hi-speed sync triggering mode is effective only when the flash unit is used together with
hi-speed sync trigger, e.g., Godox Cells II transceiver.
Hi-speed sync triggering mode is not available when the flash unit is mounted onto the
camera hotshoe.
Step
100%
70%
30%
Time of Auto off
5 min.
10 min.
15 min.
9. Buzz Function
The buzz function can be controlled by pressing BUZZ Button (15).
When the buzzer is turned on, is shown on the LCD display.
10. Wireless Control Function
The flash unit is built in with a Wireless Control Port (9) so that you can wirelessly control
the on-and-off of your flash, modeling lamp and buzzer, as well as adjust the flash output
level, etc.
To control the flash wirelessly, you need a Godox FT series remote control set (on-
camera and on-flash transceiver). Insert its receive end into the Wireless Control Port (9)
on the flash and insert the transmit end into the camera hot shoe. Settings made on the
hotshoe-mounted transceiver and receive ends will be wirelessly communicated to the
flash. Then you can press the camera shutter-release button to trigger the flash.
For full instructions on the use of FT series remote control, see its user manual.
When the flash unit receives wireless signals, is shown on the LCD display.
11. Sync Triggering
The Sync Cord Jack (10) is a Φ3.5mm plug. Insert a trigger plug here and the flash will be
fired synchronously with the camera shutter.
12. PC Sync Triggering
Insert one end of a PC sync cable into the PC Sync Socket (11) of the flash unit and the
other end into the PC Sync Socket on the camera. The flash unit will fire when the camera’s
shutter-release button is pressed.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Godox AR400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Godox AR400 in the language / languages: English as an attachment in your email.

The manual is 1,02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info