641050

Glunz 672032 Manual

3
Zoom out
Zoom in
Previous page
1/8
Next page
User manual
1. Getting the clock started
Insert a battery type LR6 or Type AA according correctly polarized into the battery compartment.
The movement will start initalizing procedure adjusting the hands to 12 o’clock position.
2. Signal receiption mode:
a. Automated procedure: will start by inserting the battery. After 2 to 10 minutes the hands will
adjust to current time, according to transmitter’s signal.
b. Manual / Forced enable
Enabled by press the WAVE button longer than 3 seconds.
The second, minute and hour hand will reset to 12 ’o clock position and enter signal reception
mode.
The clock sets the hands to the exact time and start working after signal reception successfully.
The
entire procedure takes 3 - 10 minutes approximately after all hands rest to 12 o’clock. If fail in
signal
reception, the clock starts working from 12 o’clock accordingly.
3. Manual time setup (in areas with no or low signal coverage): press the SET button for more
than 3 sec. to start the process. The minute and hour hands will start turning. Keep the button
pressed until approaching your required time. For adjusting the second hand keep pressing the
SET button in step mode until correct position.
The time will be adjusted automatically when time signal is received later.
4. Reset
Necessary after exchange of battery. Just press the RESET button once after inserting new
battery into compartment.
Hints:
Replace the battery after one year, to guarantee the correct function of the clock. After inserting
the battery the clock will set the hands to 12’o clock position and starting to receive the readio
signal.
Safety instructions
• We do not assume liability for resulting damages to property or personal injury if the product
has been abused in any way or damaged by improper use or failure to observe these
operating instructions. The guarantee will then expire!
• Unauthorised conversion and/or modification of the device are inadmissible because of safety
and approval reasons (CE).
• The appliance must not be subjected to heavy mechanical stress.
• Do not leave packaging materials around unattended; they can become a dangerous toy for
children.
• The unit may only be used in dry inside areas.
• Servicing, adjustment or repair works must only be carried out by a specialist/ specialist
workshop.
If any questions arise that are not answered in this operating instruction, contact our Technical
Advisory Service or other experts.
Dispose of waste electrical and electronic equipment
In order to preserve, protect and improve the quality of environment, protect human
health and utilise natural resources prudently and rationally, the user should return
unserviceable product to relevant facilities in accordance with statutory regulations.The
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Glunz 672032 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Glunz 672032 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info