636444
14
Zoom out
Zoom in
Previous page
1/19
Next page
26 27
Menu
New Password Use the 0–9 buttons to enter your new password
(4 digits) here.
Conrm Password Re-enter your password here to conrm.
OSD Setting
This menu allows you to change settings for OSD appearance and more. Use
/ to select OSD Setting and press OK to proceed.
Subtitle Display Use / to toggle between On or O. Set to
On if you want to see subtitles on the screen.
OSD Timeout Use / to set the time after which on screen
banners and messages disappear. The range
is 110 seconds.
Menu Style Use / to change color of OSD.
OSD Transparency Use / to set the OSD transparency from
O to 40% with 10% steps.
Volume step Use / to toggle between x1 or x2 to set
the step for changing volume.
Load default OSD settings Press OK to clear all OSD settings and reset to
default values.
Auto Standby
Auto Standby is a new feature that helps you with reducing power consump-
tion. See chapter Automatic Power Down (p. 11) for details.
Auto Standby Use / to toggle between On or O. When set
to On, the receiver will turn to standby if it doesn’t
receive any commands from the remote control
for three hours. Set Auto Standby to O to avoid
the automatic shut down.
Turn on after blackout Use / to toggle between On or O. Set to On
if you want the receiver to automatically turn on
after a blackout.
4.5 Tools
Use / to select Tools and press OK or to enter. Use / to highlight the
desired submenu and press OK to select. Press EXIT or MENU to get back to
the main menu.
Information
This submenu shows receiver specic information such as hardware version
and software version. Please have the Information screen on hand when you
call our hotline. The person who answers your call might ask for the informa-
tion given in this screen.
Load Factory Settings
This option allows you to reset the receiver to factory settings, which clears
all your settings and stored channels. It will restore your receiver to an “out
of the box” state. Use / to select Load Factory Setting in the Tools menu
and press OK. You are asked to input password. Input the correct password
using the 0–9 buttons (default password is: 0000). A conrmation window is
displayed. Select Yes to return to factory settings. Select No if you don’t want
to restore. Press EXIT to leave.
Upgrade by RS232
S/W upgrade by OTA
Upgrade by USB
This option is highly recommended to be used only by advanced users.
Upgrade by RS232 allows you to upgrade your receiver’s software via RS232
cable connected to your computer. You must use an external converter to
connect RS232 to SCART connector. Use / to select Upgrade by RS232
and press OK. Select START and press OK or to start upgrading. Press EXIT
to leave.
This receiver is equipped with an Over The Air software upgrade option. An
Over The Air update might not be available in your region. Please contact
your local service hotline for more information about this option. Use / to
select S/W upgrade by OTA and press OK. Select START and press OK or to
start upgrading. Press EXIT to leave.
This feature allows you to upgrade your receiver’s software via the USB port.
If new software is available for your receiver, it can be downloaded from our
website www.opticum.com.pl.
Place the software le (unzipped) in the root directory of your USB storage
device (HDD, memory stick etc.) and insert this device into the USB port of
the receiver. Select Upgrade by USB from the Tools menu and press OK to
proceed. The upgrade menu will now be displayed.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Globo OPTICUM HD T90 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Globo OPTICUM HD T90 in the language / languages: English as an attachment in your email.

The manual is 4,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info