747124
3
Zoom out
Zoom in
Previous page
1/24
Next page
TIME SETTINGINSTRUCTIONS
The clock will take you through all of these settings in this order and it won’t allow you to skip these settings.
NOTE: If you do not select anything for more than 20 seconds the clock will exit the setting mode and return back to the
regular display mode.
Press and hold SET button for 3-5 seconds to access the setting mode
The short hand LEDs representing the hour hand on the front face of the clock will flash. Press + or - to change the
hour (When the 12 dots circle representing the analogue face flashes at the same time this indicates PM
time; to change it to show AM time, just press the + button to scroll up the hour till 12 and the flashing will
stop; when just the hour hand flashes this indicates AM time; to change it to show PM time, repeat the
same operation as before.)
Press SET to confirm when required hour has been selected, then the longer hand LEDs representing the minute
hand will now flash, press + or - to change the minute. Press set to confirm and exit the setting.
Optional: Press and hold down + when the clock is in regular display mode until a beep will deactivate the second dot
display. To activate the dot display function again, repeat the same operation.
ALARM SETTING INSTRUCTION
The clock arrives with no alarm set as default.
Press and hold down the alarm button to turn the alarm on.
Press the alarm button once to enter the settings page
When the short hand flashes press + or - button to change the hour (when you saw the 12 dots circle
representing the analogue face flashes at the same time this indicates PM alarm time; to change it to show
AM alarm time, just press the + button to scroll up the hour till 12 and it will then stop flashing; when just
saw the hour hand flashes this indicates AM alarm time; to change it to show PM alarm time, repeat the
same operation as .
Please SET button to confirm when the required alarm hour has been selected, then the longer hand representing
the minute will now flash, press + or - to change the minute. Press set to confirm. Your alarm time is now set.
Pressing the alarm button once when the alarm is in regular display mode will bring up the alarm time that it is set for. A
blank face in the middle of the display screen means that no alarm has been set or the alarm is currently turned off.
When you have already set the alarm and you want to change it, you do not need to press and hold the alarm button.
Just Press once to show the alarm set, and then press it again to enter the alarm settings mode.
To turn off the alarm you have set, just press and hold down the alarm button and the middle of the screen will turn
into blank again. Turn the alarm back on, repeat the same operation.
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gingko Analogue Click Clock at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gingko Analogue Click Clock in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info