Manual Gigaset AL410A (page 1 of 2) (English)

580076

Zoom out

Zoom in

1/2

Gigaset AL410A_UK _ A31008-M2237-L151-1-7619

Pack contents

If you have purchased a

model with multiple

handsets the package should

contain two batteries, a

battery cover, a charging

cradle 8 with mains adapter

9 for each additional

handset.

1 one Gigaset AL410A Base station

2 one mains adapter

3 one Gigaset AL410 handset

4 one phone cord

5 two batteries

6 one battery cover

7 this Quick start guide

Connecting the base station

¤ Connect power adapter 1

and Phone jack 2 to the

base and place the cable

recesses.

Please ensure the power

lead is fully inserted.

Please note:

u The mains adapter must always be connected, as the Phone will not

operate without a mains connection.

u Always use the power adapter and Phone cord supplied. Pin

connections on Telephone cables can vary.

Connecting the charging cradle (if included)

¤ Plug the mains adapter into the

plug socket 2.

¤ Connect the flat plug from the

mains adapter 1.

If you need to disconnect the plug from the

charging cradle, press the release button 3 and

disconnect the plug 4.

Frequently asked questions

Q: There is no dial tone.

A: Press call button for 2 seconds (long press) to obtain dial tone.

A short press opens the redial list.

Q: The line is crackling / not clear.

A: Have you used the new line cable provided? Please do not use an old cable.

Q: The display is not clear / seems to be broken.

A: The display is protected by a plastic film, please make sure you have removed

the protective film.

Q: The handset is not registered.

A: If your handset is not registered, please follow the Registration handset proce-

dure.

(see user manual)

Q: The caller ID is not working.

A: Have you subscribed to this service (CLIP) from your provider?

Q: Message indicator flashing and I cannot retrieve my message.

A: Message indicator will flash to indicate missed calls as well as new messages

of text messages. (see user manual)

Please check:

Have you used the phone cord supplied ¨

Have you fully inserted the power cable into the base station ¨

Have you inserted the batteries correctly ¨

Have you charged the battery for 9.5 hours ¨

Have you set up the Date/Time ¨

To download the latest manuals, visit our web-site: http://www.gigaset.com

You have questions? As a Gigaset customer, you can take advantage of our comprehensive

service offerings. You can find help quickly in this User Manual and in the service pages of

our Gigaset online portal: http://www.gigaset.com

Product may not be fully compatible with the national telephone network. It is clearly

specified on the box near the CE mark for which country/countries the equipment has been

developed. If the equipment is used in a manner inconsistent with this advice or with the

instructions of the manual and on the product itself, this may have implications on the

conditions for warranty or guarantee claims (repair or exchange of product).

In order to make use of the warranty, the product purchaser is asked to submit a receipt

which proves the date of purchase (date from which the warranty period starts) and the

type of goods that have been purchased.

If you have problems setting up or operation this product please call

GIGASET UK HELPLINE 084503 18190

GIGASET IRL HELPLINE 0818 200 033

Preparing the handset

Initial charging and discharging of the batteries

¤ Insert the batteries the right way round. The

polarity is indicated

in/on the battery compartment.

¤ Then slide the battery cover back into the

main casing until it clicks into place.

If you need to open the battery cover,

for instance to replace the batteries,

place your fingertip in the grooved area

on the top of the cover and slide down.

The correct charge status can only be displayed if the

batteries are first fully charged and discharged.

¤ Place the handset in the charger

for 6 hours.

Then remove the handset from the charger,

make and receive Phone calls, setup the Phone

etc. and do not put it on the charger until the

batteries are fully discharged.

6 h

Setting the date and time

Set the date and time so that the correct date and time can be assigned to

incoming calls, and so that the alarm can be used.

¤ Press the key below MENU on the

display screen to open the main

menu.

¤ Press the key below OK on the display

screen to confirm your selection.

The

Date/Time menu item appears on the

display.

¤ Press the key below OK on the display

screen to open the input field.

Settings

”U

¤ The active cursor position is flashing.

Enter day, month and year as an

6-digit number via the handset,

e.g. 150912 for

15.09.2012.

¤ Press the key below OK on the display

screen to confirm your setting.

Date/Time

”U

Date 15.09.12

”

¤ Press the bottom of the control

key ...

... until the

Settings menu item

appears.

Setting the date and time

Message indication

Message Indication Key ‘ on handset will flash to indicate one or all of the

following events:

u missed calls (if caller ID is enabled for your line numbers will be shown)

u new messages on the answer machine

To retrieve your messages, just press the flashing ‘ key on your handset.

Display in idle status

The strength of the reception signal between base and handset:

– Good to poor:

– No reception:

Charge status of the batteries:

– ¤ Batteries charged to over 66 %

– £ Batteries charged to between 34 % and 66 %

– ¢ Batteries charged to between 11 % and 33 %

– ¡ Flashes: batteries charged to below 11 %

– Ÿ ¡ Ÿ ¢ Ÿ £ Ÿ ¤ Charging

If Eco Mode+ is activated, the ½ icon is displayed in the top left corner of the

display.

Time 16:09

”

¤ The active cursor position is flashing.

Enter hours and minutes in 4-digit

format, e.g. 1609 for 16:09.

¤ Press the key below OK on the display

screen to confirm your setting.

¤ Press and hold a to return to idle

status.

INT 1

11.12. 11:56

Þ Menu

Registration handset

You can register up to four handsets to your base. You can also register other

Gigaset handsets and handsets from other devices with GAP functionality.

Your handset should already be registered by default. Nevertheless, if your

handset is flashing Put into base you have to register your handset.

If your handset is flashing Base then it can be that:

u Your base station is not switched on, please check if the power supply is

connected properly.

u There is too much distance between the handset and base.

Automatic registering procedure

In the case the automatic registering procedure failed or you want to

Manual registration procedure

1. On the handset:

MENU ¤ Settings ¤ OK ¤ Handset ¤ OK ¤ Register HS ¤ OK ¤ enter the system

PIN for the base and press

OK. Default PIN = 0000

2. On the base station:

Within 60 seconds of entering the system PIN, press and hold the

registration/paging key (min. 3 seconds). Registration takes approx.

1 minute.

Place the handset

with the display

facing up in the base

station.

Put into base

Þ Menu

Registering

The handset registers

automatically.

Registration can take

up to 5 minutes.

Do not remove the handset from

the base station during this time.

AL410A

Congratulations

By purchasing a Gigaset, you have chosen a brand

that is fully committed

to sustainability. This product’s packaging

is eco-friendly!

To learn more, visit www.gigaset.com.

I can make out going calls but can not receive incoming calls Submitted on 1-7-2022 at 17:36
Reply Report abuse
Message left is not relayed, also when dial 1471 to note last caller no response
Submitted on 22-6-2022 at 14:05
Reply Report abuse
Should the handset only be placed on the base when it needs charging.
I’ve always put in on the base all the time and I think the batteries are not charging properly ? Submitted on 4-11-2021 at 18:06
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Gigaset AL410A in the language / languages: English as an attachment in your email.

The manual is 0,27 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Gigaset AL410A Manual

Product: