580061
19
Zoom out
Zoom in
Previous page
1/22
Next page
19
Gigaset A590 / SEA / A31008-M2045-Y701-2-7619 / main.fm / 26.05.2010
Changing the ringer volume
There are 4 levels of ringer volume (default: L2). You
can adjust the ringer volume.
Precondition: Base station is in idle mode.
¤ Press [ / \.
The current setting is shown on the display.
¤ To switch the ringer off completely (L0) press and
hold the
* key.
When switching the ringer off the key beep is also
deactivated.
Changing the PIN
The base station is protected via PIN against unau-
thorised handset registration. You can change the
preset PIN via menu.
f¢ADVANCED SET ¢|¢CHANGE PIN¢|
¢
~
(enter current PIN, default: 0000) ¢|
¢
~
(enter new PIN: 0 to 9 digits) ¢|
¤ Use { as backspace.
Restoring to the factory settings
You can reset any individual settings and changes
that you have made.
Phone book and calls list entries are not affected.
After restoring the base, handsets are not affected.
Precondition: handset and base are in idle mode.
Restoring the base
f¢ADVANCED SET ¢| ¢RESET¢|
¢p (select BASE) ¢|¢|
Restoring the handset
f¢ADVANCED SET ¢|¢RESET¢|
¢p (select HANDSET) ¢|¢|
Connecting to PABX
Your phone is preset at the factory for operation on
the main connection. For operation on a PABX, you
may have to change the following values. Please refer
to the user guide for your PABX.
¤ To change the handset settings use the menu.
f ¢ ADVANCED SET
Prefix setup
You can set a prefix which is automatically added to a
phone number with at least 5 digits. This prefix can be
used to dial into the outside line when operating the
device on a PABX.
Precondition: The number must be dialled in idle
mode, i.e. first
~
then ª.
f¢ADVANCED SET ¢|
¢AUTO PREFIX¢|
¢p(select ON or OFF) ¢|
~
(enter prefix, max. 5 digits) ¢|
¤ To enter a pause in the prefix press and hold Z.
Pause duration is one second by default.
Example: Prefix is ON and set to 65
Setting flash time
You can set the flash time to 100 (SHORT), 300
(
MEDIUM) or 600 (LONG) ms. (Default: SHORT)
¢f¢ADVANCED SET ¢|
¢FLASH TIME ¢|
¢p(select SHORT, MEDIUM or LONG) ¢|
Changing the dialling mode
You can set the dialling mode to PULSE or TONE.
(Default:
TONE)
f¢ADVANCED SET ¢|
¢DIAL MODE ¢|
¢p(select PULSE or TONE) ¢|
Please note
¤ If you have forgotten the PIN reset the base
unit to the factory settings to reset the PIN to
default setting 0000,
¢ page 19.
AUTO PREFIX
Set a prefix for dialling outside line.
FLASH TIME
Change the flash time.
DIAL MODE
Change the dial mode.
You dial Really dialled number
1234 1234
12345 65P12345
#12345 65P#12345
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gigaset A590 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gigaset A590 in the language / languages: English as an attachment in your email.

The manual is 0,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info