Manual Geneva WORLDRADIO DAB PLUS (page 3 of 40) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish)

510651

Zoom out

Zoom in

1/40

English







1. Touch the FM key.

2. Manually select an FM station by turning the right

control dial.

3. Automatically select an FM station by pushing the

right control dial.

  

1. Touch the DAB key.

2. Select a DAB station by turning the right control

dial. Then click the right control dial or wait for a

few seconds.

WorldRadio DAB+ is compatible with DAB, DAB+,

DMR and DMB.

  

Initially the WorldRadio DAB+ Model has no DAB

stations stored. Through the “Scan” function, the

radio will nd the available stations in your region.

Afterwards the stations are automatically stored.

The “Scan” function is also needed after traveling to

a new location with different radio stations, or when

you move the WorldRadio to a room with a different

radio reception.

1. Touch the DAB key.

2. Turn the right control dial to select “Scan” on the

menu. Then click the right control dial or wait for a

few seconds.

3. Once all available stations have been found, you

will see a radio station list.



1. Connect one end of a Line-In cable to the audio

device ( headphone or Line-Out plug ).

2. Connect the other end of the cable to the Line-In

plug on the back of the WorldRadio.

3. Touch the

key.



Mobile phones and computers with Bluetooth can

connect to the WorldRadio and play music. The mobile

phone or computer must support .

  



1. Touch the WorldRadio key. Wait for 20 seconds

until the display shows “Pairing”.

2. Select “settings” on your iPhone

. Select “General /

Bluetooth”. Turn on Bluetooth. New Bluetooth

devices are discovered automatically. After a few

seconds “Geneva ... ( Not Paired )” will appear.

3. Select “Geneva ...”. The phone is now connecting

( “Pairing” ) to the WorldRadio.

4. If the phone asks for a PIN: enter “0000”

( four zeros ).

5. Now you can play music on an iPhone

App “iPod”

and listen to it on the WorldRadio.

See BLUETOOTH SETUP on Page 2.





Go to genevalab.com and select “Support”.



1. Touch

. The WorldRadio will initially search for

previously paired devices.

2. When the WorldRadio connects, the display shows

“Connected” for a few seconds.

3. Play music on the mobile phone. Music will start

playing on the WorldRadio automatically after a

few seconds. Most phones connect automatically

to the WorldRadio after the initial setup (“Pairing”).



The red alarm bell and red time on top of the display

indicate that the alarm is enabled. If there is no alarm

bell on the display, the alarm is disabled.



1. Turn on the WorldRadio, then touch the

key to

set the desired alarm time.

2. To select the hour turn the right control dial, then

push the right control dial.

3. To select the minutes turn the right control dial,

then push the right control dial to conrm the

alarm time. After setting the alarm time, the alarm

is enabled.



The the alarm can be enabled and disabled by touch-

ing the

key.



There are two alarm sounds ( radio or beep ) which are

selected automatically.

• Radio: If the radio is playing when turning

the WorldRadio off, the radio will be used as the

alarm sound.

• Beep: If Bluetooth or Line-In are playing when

turning the WorldRadio off, the beep will be used

as the alarm sound.



Setting the time works differently for the two

WorldRadio models:



1. Touch

key.

2. To select the hour turn the right control dial, then

push the right control dial.

3. To select the minutes turn the right control dial,

then push the right control dial to store the time.



Every time the WorldRadio gets a valid time signal

from a DAB station, it will set the time automatically.

If there are no DAB stations, it is possible to set the

time manually:

1. Touch

key. Push the right control dial for three

seconds until the the time menu appears.

2. To select the hour turn the right control dial, then

push the right control dial.

3. To select the minutes turn the right control dial,

then push the right control dial to store the time.



You can play music from the following audio sources:

• FM Radio

• DAB Radio ( available only for WorldRadio DAB+ )

• Mobile phone or computer via Bluetooth

• Other devices with a Line-In cable

GENEVA

Bluetooth

DAB Radio

FM Radio

Line-In





• Push: Power on and off.

• Turn: Volume up and down.



• Change FM frequency, select DAB stations, set

alarm, set time.



• Audio source selection: FM, DAB,

Line-In or Bluetooth.

• Set time, alarm, audio settings.







Press a touch key for about half a second. Note that

the WorldRadio DAB+ sets the time automatically.



Settings on iPhone

Playing music with the

iPhone

Left control dial

Battery cover

Power Adapter Plug

Line-In Plug

To Power Adapter

Right control dial

Connector

Touch keys

Battery

Battery levelCurrent audio source Alarm time

Line-in

Bluetooth

Audio

Set Alarm

Set Time ( WorldRadio )

DAB ( WorldRadio DAB+)

20121221_WR_manual_v1.5.indd 2-3 12. 21.12 11:11

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Geneva WORLDRADIO DAB PLUS in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 2,24 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Geneva WORLDRADIO DAB PLUS Manual

Product: