503384
29
Zoom out
Zoom in
Previous page
1/31
Next page
SET-TOP BOX STATUS
The “STB status” menu displays the following
information: hardware version, software version,
database version.
TROUBLESHOOTING GUIDE
Problem Solution
Doesn’t respond to commands from front
panel and RCU
Restart the STB (switch off and switch on the power)
Does not display any message on the front
panel or STB has no power
Check the main power cable to see that it is plugged into a suit
-
able power outlet.
Check to see if STB is in Standby mode
No Picture Ensure that the STB is switched on (see above).
If you use the RF Output, check that the RF Lead is connected
firmly to the STB and TV/VCR.
Check that you have selected the correct channel or Video Output
on your TV.
If you are using the RF Output, check that you have correctly
tuned the UHF channel of the STB or TV.
Check the brightness level of the TV.
Poor picture quality See “No Picture” above.
Check the signal level; if it is low then try adjusting the alignment
of your dish.
Re-start the STB.
No Sound See “No Picture” above.
Check the volume level of the TV and STB.
Check the Mute status of the TV and STB.
Remote Control does not operate Point remote control directly towards the STB.
Check and replace batteries.
No Signal or Bad Signal Check the LNB - replace if necessary.
Check the cable from the LNB.
Check the position of the dish - realign the dish if necessary.
If you use a DiSEqC 1.0 switch, check that you have connected
the LNBs to the correct connections on the switch.
Check the settings in “Antenna setupmenu.
Re-start the STB
SET-TOP BOX / TROUBLESHOOTING GUIDE
31
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for General satellite CI-7100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of General satellite CI-7100 in the language / languages: English as an attachment in your email.

The manual is 2,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of General satellite CI-7100

General satellite CI-7100 User Manual - German - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info