479874
4
Zoom out
Zoom in
Previous page
1/9
Next page
TRANSMITTERS BATTERY DISCHARGING
The discharging of the battery is signalled through the LED of the
transmitter. If the LED does not light fix but flashes while pressing
one of the transmitter’s buttons it is necessary to replace the
batteries.
BATTERIES: CR1616
Note: put the batteries in the appropriate container.
TECHNICAL DATA
Power supply 10.5-14.5 V dc.
Working temperature -30° + 85°
Max. Current drawn alarm OFF
15 mA (with self-powered siren connected)
Transmitters frequency
433.92 MHz
Direction indicator lights relay contact capability
10A dc
Engine immobilisation relay contact capability 10A dc
Outlet horn relay contact capability
10A dc
Central door locking relay contact capability
10A dc
Comfort positive/negative outlet capability 100mA
GEMINI 7147
DESCRIPTION.
GEMINI 7147 is 2 wires, high power electronic siren designed to be installed quickly and simply in the engine
compartment.
CONNECTIONS.
Connect the RED wire to the vehicle battery positive terminal. Connect the siren BLACK wire to the alarm
YELLOW-BLACK wire.
INSTALLATION.
Install the siren in the engine compartment using the bracket and the screws supplied with the kit. Install the siren
away from areas of intense heat and turn to low the siren ear trumpet to avoid water infiltrations. Protect the wires
from water and humidity. Do not steam clean the siren.
GEMINI 7125
DESCRIPTION.
GEMINI 7125 is a high power electronic siren. It can be installed quickly and simply in the engine compartment and
it can be connected to the alarm unit using the harness supplied in the kit.
WORKING DESCRIPTION.
The siren Gemini 7125 is supplied with an internal device, which allows the working of the siren also in case of
absence of power supply or cutting of the connection wires of the unit. Through the codified system with alarm and
siren, the alarm activate/de-activate both the battery charge and the feeding of the siren. The feeding is present
only by alarm activated and 3 minutes after the alarm de-activation. Before disconnecting the siren, wait 3 minutes
from the alarm de-activation.
WIRING CONNECTIONS.
Connect the BLACK initialled RB wire to the battery positive terminal of the vehicle.
Connect the BLACK initialled MB wire to the battery negative terminal of the vehicle.
Connect the BLACK initialled L wire to the BLUE wire coming from the alarm unit.
Connect the BLACK initialled S wire to the PINK wire coming from the alarm unit.
N.B.: before supplying the siren it is necessary to CHECK the connections.
INSTALLATION.
Install the siren in the engine compartment using the bracket and the screws supplied in the kit. Install the siren
away from areas of intense heat and turn to low the air trumpet of the siren in order to avoid water infiltrations.
Protects the wires from water and humidity isolating connection points using protection sheath.
GEMINI 7025
DESCRIPTION.
Gemini 7025 is a self-powered, high power, electronic siren studied to install in the vehicle’s engine compartment.
WORKING DESCRIPTION.
The self-powered electronic siren 7025 is supplied with an internal device, which allows the working of the siren
also in case of absence of power supply or cutting of the connection wires of the unit.
Through the codified system with alarm and siren, the alarm activate/de-activate both the battery charge and the
feeding of the siren. The internal battery recharge activates only while alarm disarmed.
CONNECTIONS.
Connect the BLACK initialled RB wire to the vehicle battery positive terminal.
Connect the BLACK initialled MB wire to the vehicle battery negative terminal.
Connect the BLACK initialled L wire to the alarm unit BLUE wire.
Connect the BLACK initialled S wire to the alarm unit PINK wire.
Isolate the BLACK initialled Z wire.
N.B.: before supplying the siren, check all connections.
To de-activate the alarm unit and the engine immobilisation, turn the siren key to off. The internal battery recharges
while alarm de-activated.
INSTALLATION.
Install the siren in the engine compartment using the bracket and the screws supplied with the kit.
Install the siren away from areas of intense heat and turn to low the ear trumpet of the siren. Protect the siren wires from
water and humidity.
This device is guaranteed against any manufacturing or working fault for 12 months from purchase date. The manufacturer
declines every responsibility for any defect or failure to the device and to the electric plant of the vehicle due to an incorrect
installation or to the alteration of the technical data stated in this manual.
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gemini 7090 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gemini 7090 in the language / languages: English as an attachment in your email.

The manual is 1,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info