479848
3
Zoom out
Zoom in
Previous page
1/7
Next page
DIP SWITCH PROGRAMMING TABLE
1 ON Current drawn active
1 OFF Current drawn isolated
2 ON Acoustic activation/de-activation
isolated
2 OFF Acoustic activation/de-activation active
3 ON Passive arming active
3 OFF Passive arming isolated
4 ON Self-learning active
4 OFF Self-learning isolated (normal use)
5 ON Locking control 25 sec
5 OFF Locking control 1,5 sec
6 ON Positive alarm armed isolated
6 OFF Positive alarm armed activated
TECHNICAL DATA
Protection degree mechanic closure IP 54
Power supply 10.5 -14.5m Vdc
Working temperature -30 °C + 85 °C
Current drawn alarm ON 14 mA
Current drawn alarm OFF 9 mA
Nominal voltage backup battery 7,2 V
Capability backup battery 170 mAh
Engine immobilisation relay contact capability 8 A continuous
Central door locking relay contact capability 10 A continuous
Alarm cycle 30 seconds
Siren audible level at 1 meter in open space 118 >dB
Minimum power absorption required to trigger 5 W
Max. current for control positive alarm armed 500 mA
Max. current for control supplementary siren with negative control 500 mA
ULTRASONIC MODUL DESCRIPTION
GEMINI 5023 / 5123 (for 6202GE-KT and 6203GE-KT)
The 5023 or 5123 sensors protect the vehicle passenger compartment, detect the door
opening or a movement in the passenger compartment and activate the alarm.
INSTALLATION INSTRUCTIONS
The connection with the alarm system is easy as the 6203GE and 6202GE wiring harness
is supplied with a connector for the connection of the sensor.
Put the connectors of the sensor’s ultrasonic heads in the appropriate seats: RED for the
connection of the TX head; WHITE for the connection of the RX head.
ULTRASONIC ADJUSTMENT
- Lower one of the front windows approximately 20 cm.
- Adjust the sensor to a minimum sensitivity ;
- Activate the alarm pushing twice on the transmitter’s button (button 2) verifying all doors
are closed.
- Put an hand through the open windows and move it ; the LED will light red. Increase the
sensitivity till the alarm triggers.
NOTE
BACK-UP BATTERY CHARGING IS ALLOWED ONLY WHEN THE SYSTEM IS DISARMED AND THE
STARTING KEY OF THE VEHICLE IS IN ON POSITION.
IF YOU WANT TO WASH THE ENGINE OF THE CAR,PLEASE TAKE CARE DO NOT STEAM CLEAN.
PRODUCT HOMOLOGATIONS
European Directive 95/56 CE (e1295/56 001100).
REMOTE CONTROLS HOMOLOGATION
.Remote Control Homologation ETSI 300 220.
Art. 6108E
Art. 5009E
The manufacturer declines every responsibility for any possible defect or failure to the device and to
the vehicle’s electric system due to incorrect installation or to the alteration of the indicated
Technical Features. The alarm system has only a dissuasive function against possible thefts.
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gemini 6203 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gemini 6203 in the language / languages: English as an attachment in your email.

The manual is 1,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info