762353
1
Zoom out
Zoom in
Previous page
1/2
Next page
123
INSTRUCTION MANUAL
!!!Please refer to our website: www.geemarc.com
for an up to date user guide, as there may be
important updates and changes you need to be
aware of !!!
Cautions:
Precautions and maintenance
z For indoor use only
z To avoid risk of fire or electric shock, do not expose the unit to
moisture or condensation.
z To avoid overheating, do not block the ventilation holes on the
back of the Clock Display.
z Keep the Clock Display out of direct sunlight.
z Do not dismantle the Clock Display. There is a risk of electric
shock and there are no user-serviceable parts inside.
Dismantling the Clock Display will void your warranty.
Cleaning the LCD Screen
z Treat the screen carefully. tThe screen of the Clock Display is
made of glass and can easily be broken or scratched.
z If fingerprints or dust accumulate on the LCD screen, we
recommend using a soft, non-abrasive cloth such as a camera
lens cloth to clean the LCD screen.
z Moisten the cleaning cloth with a cleaning solution and apply the
cloth to the screen.
Introduction:
Thank you for the purchase of the Clock Display. It is designed to
allow you to see the time quickly and easily. Please read this User
Manual carefully to learn the correct way to use the Clock Display.
Features: Days Clock
Packaging Check List:
z 9 inch Clock Display
z User manual
z Bracket
z AC adapter
1. Product Diagram
1.1 Back side Buttons
1.2 Left side of the Clock Display
DC in “ ” on the left side of the Clock Display.
2. Getting Started
1. Place the Clock Display with installing bracket in a steady flat
position. Then plug one end of the AC adapter into a standard
100-240V AC electrical outlet and the other end into the DC IN
slot on the left side of the Clock Display.
2. Remove the protective film covering the Screen.
3. Hold and Press the power button on the backboard to turn
On / Off the Viso30.
3. Operating Instruction
When you power the unit on for the first time it will show the
startup logo. Then the main menu will display after a few seconds.
After this the Days Clock will display.
You can easy see the details week day, time, month and year on
the Clock Display screen, and they will change automatically.
4.Setting
Press Menu key and select the Setting icon in the main menu.
Press “ Button to enter the Setting interface and press or
to highlight your selection. Press “ Button to enter the
setting value. Then press or to set the value.
You can select Style Setup, Set Days-Clock, Calendar Setup,
System Setup, and so on.
4.1. System Setup
Language
Changes the operating language of the photo Clock Display.
Available Values: English, Nederland, Français, Deutsch, Italiano,
Espanol, Hebrew. Use the buttons or to select the language.
Grayscale
Press and buttons to select the Gray Scale level that you
require between 1 to 10.
Brightness
Press and buttons to select the Brightness level that you
require between 1 to 10.
Contrast
Press and buttons to select the Contrast level that you
require between 1 to 10.
Auto power on & off function Remarks:
1. In order to activate the auto power ON & OFF function, please
check the settings for the Auto Shut Time, Sleep timer, Auto
boot Time and Regular Boot are set correctly. If set to OFF,
the function is not activated.
2. A reminder for the Auto OFF appears 1 Minute before the frame
switches off. Press any key to cancel the Power OFF function.
3. If Power OFF is activated and the frame switches off at the
selected time, the frame goes into Sleep-mode. To switch the
frame on again, you need to press the “Power” Button on
the Remote or the rear side off the frame twice.
Auto Shut Off Time
Set the auto power off time in the format of “[Hour]: [Minute]”. In
System setup / Auto shut time. Press button to select. Use
the and buttons to switch between fields. Press or
buttons to change time field values. Press button to validate.
Keep the Sleep Timer on. Press Menu button to exit.
Auto Power On Time
Set the auto power on time in the format of “[Hour]:[Minute]” in
System setup/Auto Boot time. Press button to select. Use
the or buttons to switch between fields. Press or
buttons to change time field values. Press button to validate.
Keep the Regular Boot on. Press Menu button to exit.
Power Frequency:
You can choose to set the function auto power ON/OFF as follows:
- Workday, Week end, Once, Every day. Use the or buttons
to change mode field values.
1. Power on/off
2. Up
3. Right
4. Play / Pause / OK
5. Left
6. Down
7. Menu
1


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Geemarc Viso 30 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Geemarc Viso 30 in the language / languages: English as an attachment in your email.

The manual is 0,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Geemarc Viso 30

Geemarc Viso 30 User Manual - German - 2 pages

Geemarc Viso 30 User Manual - French - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info