762352
1
Zoom out
Zoom in
Previous page
1/2
Next page
123
INSTRUCTION MANUAL
!!!Please refer to our website: www.geemarc.com
for an up to date user guide, as there may be
important updates and changes you need to be
aware of !!!
Cautions:
Precautions and maintenance
z For indoor use only
z To avoid risk of fire or electric shock, do not expose the unit to
moisture or condensation.
z To avoid overheating, do not block the ventilation holes on the
back of the Clock Display.
z Keep the Clock Display out of direct sunlight.
z Do not dismantle the Clock Display. There is a risk of electric
shock and there are no user-serviceable parts inside.
Dismantling the Clock Display will void your warranty.
Cleaning the LCD Screen
z Treat the screen carefully. tThe screen of the Clock Display is
made of glass and can easily be broken or scratched.
z If fingerprints or dust accumulate on the LCD screen, we
recommend using a soft, non-abrasive cloth such as a camera
lens cloth to clean the LCD screen.
z Moisten the cleaning cloth with a cleaning solution and apply the
cloth to the screen.
Introduction:
Thank you for the purchase of the Clock Display. It is designed to
allow you to see the time quickly and easily and any warning
functions displayed.
Please read this User Manual carefully to use the Clock Display
correctly.
Features: Days Clock
Packaging Check List:
z 7 inch Clock Display
z User manual
z Bracket
z AC adapter
1. Product Diagram
1.1 Back side Buttons
1. Menu
2. Exit
3. Vol- / Up / Left / Increase
4. Vol+ / Down / Right / Reducing
5. Play / Pause / OK
1.2 Left side of the Clock Display
DC in “ ” on the left side of the Clock Display.
2. Getting Started
1. Place the Clock Display with installing bracket on a steady flat
position, then plug the AC adapter into a standard 100-240V AC
electrical outlet and the other end into the DC IN slot on the left
side of the Clock Display.
2. Remove the protective film covering the Screen.
3. Hold and Press the MENU button on the backboard to On/Off
Switch.
3. Operating Instruction
When you power the unit on for the first time it will show the
startup logo. Then the main menu will display after a few seconds.
After this the Days Clock will display you can easy see the details
week day, time, month and year on the Clock Display screen, and
they will change automatically.
4.Setting
Press Menu key and select the Setting icon in the main menu.
Press “ Button to enter the Setting interface and press
to highlight your selection. Press “ Button to enter
the setting value. Then hold and press to set the value.
You can select Style Setup, Set Days-Clock, Calendar Setup,
System Setup, and so on.
4.1. System Setup
Language
Changes the operating language of the photo Clock Display.
Available Values: English, Nederland, Français, Deutsch, Italiano,
Espanol, Hebrew.
Grayscale
Hold and press “ ” or “ ” buttons to select the Gray Scale
level that you require between 1 to 10.
Brightness
Hold and press “ ” or “ ” buttons to select the Brightness
level that you require between 1 to 10.
Contrast
Hold and press “ ” or “ ” buttons to select the Contrast
level that you require between 1 to 10.
Auto power on & off function
Remarks:
1. In order to activate the auto power ON & OFF function, please
check the settings for the Sleep timer and Auto boot Time are
set correctly. If set to OFF, the function is not activated.
2. A reminder for the Auto OFF appears 1 Minute before the frame
switches off. Press any key to cancel the Auto OFF function.
3. If Power OFF is activated and the frame switches off at the
selected time, the frame goes into Sleep-mode. To switch the
frame on again, you need to press and hold the Menu Button at
the rear side of the frame.
Auto Shut Time
Set the auto power off time in the format of “[Hour]:
[Minute]”.Choose System setup/ Auto shut time with . Use
the “ ” or “ ” buttons to switch between fields, hold and
press “ ” or “ ” buttons to change time field values. Keep
the Sleep Timer on.
Auto Boot Time
Set the auto power on time in the format of “[Hour]: [Minute]”.
Choose System setup/ Auto boot time with Use the “
or “ ” buttons to switch between fields, hold and press “
or “ ” buttons to change time field values. Keep Regular Boot
on.
Power Frequency:
You can choose to set the function auto power ON/OFF as follows:
- Workday, Week end, Once, Every day. Use the “ ” or “
buttons to switch between fields, hold and press “ ” or
buttons to change mode field values.
Firmware Version:
You can check the software version of your Viso 20.
1


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Geemarc Viso 20 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Geemarc Viso 20 in the language / languages: English as an attachment in your email.

The manual is 0,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Geemarc Viso 20

Geemarc Viso 20 User Manual - German - 2 pages

Geemarc Viso 20 User Manual - French - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info