The Sonic Boom Alarm Clock Model SBP100 is warranted
against manufacturing defects in materials and workmanship
for one (1) year from the date of purchase. Within this
period Sonic Alert will repair or replace at our option the
SBP100 without charge for parts and labor. Simply send the
SBP100 (postpaid) and a copy of your sales slip as proof of
purchase to:
Sonic Alert Inc., 1050 E. Maple Road, Troy MI 48083
Sonic Shaker Portable Vibrating Alarm Clock
Model SBP100
GENERAL DATA
Power: DC 3V(1.5Vx2 pieces AA SIZE) &
DC1.5V (1.5Vx1 pieces AA A SIZE)
11
8
1
2345
9
6
7
1. ALARM ON/OFF
2. TIME SET
3. ALARM SET
4. HOUR
5. MINUTE
6. ALARM MODE SWITCH
7. SNOOZE & LIGHT BUTTON
8. ALARM INDICATOR
9. PM INDICATOR
10. BATTERY COMPARTMENT
11. TEST BUTTON
INSTALLATION
(See diagram for additional directions for settings)
1) HOW TO INSTALL BATTERIES
1.1 Remove the BATTERY COMPARTMENT (10), insert 1 AAA
battery for the clock and insert 2 AA batteries for the vibrator /
alarm.
1.2 To insert the batteries, please observe the correct position of the
polarity, as marked inside the battery compartment.
2) WHEN TO REPLACE BATTERIES
2.1 When the LCD screen becomes dim, it is time to change the AAA
battery.
2.2 When alarm sound quality becomes poor or volume is low or the
vibrator is vibrating very slow, it is usually an indication of weak
batteries. Replace the weak batteries to avoid any possible leakage.
3) MAINTENANCE
3.1 If the unit is not used for long period of time, remove all batteries
to avoid any possible leakage.
3.2 When traveling with this unit it is advised to remove the batteries
for the vibrator/alarm (2 AA size) to avoid draining the batteries
in the event light button is accidentally pressed during travel.
SETTING CLOCK TIME AND ALARM TIME
(see diagrams)
4) SETTING CLOCK TIME
4.1 Press and hold the TIME SET button (2), then press the Hour
button (4) until the correct hour is displayed. Remember to set the
correct AM or PM. When PM time is registered, a "P"(9) will
appear on the display.
4.2 Press and hold the TIME SET button (2), then press the Minute
button (5) until the correct time is displayed.
5) SETTING ALARM TIME
5.1 Press and hold the ALARM SET button (3), then press the Hour
button (4) until the correct hour is displayed. Remember to set the
correct AM or PM. When PM time is registered, a "P"(9) will
appear on the display.
5.2 Press and hold the ALARM SET button (3), then press the Minute
button (5) until the correct time is displayed.
ALARM OPERATION (see diagrams)
6) Set the alarm time as indicated in Setting Alarm Time.
6.1 Set the Alarm ON/OFF Switch (1) to ON. Alarm indicator will
appear in the top center of the display (8) indicating the alarm
function is on. The alarm is now set to turn on automatically at
the selected time.
6.2 You can select the alarm mode for waking, i.e. buzzer, vibrator, or
buzzer and vibrator by setting the Alarm Mode Switch (6) to your
desired position.
6.3 With the alarm sounding, press the ALARM OFF (3) to turn off
the alarm. The alarm comes on again the next day at the same
time.
6.4 With the alarm sounding, press the Snooze Button (7) after the
alarm sounds, the alarm will go off and will come on again in
approximately 4 minutes. You may repeat this cycle as many times
as desired.
6.5 To stop the alarm permanently set the Alarm ON/OFF Switch (1)
to OFF.
Night Light (see diagram)
7) To read the clock time in the dark, press and hold the Light /
Snooze Button (7).
Test Button
8) The test button (11) is used to demonstrate the buzzer
and vibrator without setting the alarm. To use the test
button, slide the function switch to the desired position
i.e. buzzer, vibrator or buzz/vib and press the test button
to experience the buzzer or the vibrator.
PORTABLE VIBRATING ALARM CLOCK SBP100
DIAGRAMS & OPERATING INSTRUCTIONS
IMPORTANT - Please read these instructions carefully
before use and retain for future reference.
Made in China
Sonic Alert 1050 East Maple Rd. Troy, MI 48083
1-800-566-3210 V/TTYwww.SonicAlert.com
093-BP100-003
MODEL: SBP-100 093-BP100-003 30-08-06 SIZE: (96.00 x285.00) MM
10
Need help? Post your question in this forum.
Report abuse
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Geemarc Sonic Alert SBP100SS at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Geemarc Sonic Alert SBP100SS in the language / languages: English as an attachment in your email.
The manual is 0,25 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
