762362
1
Zoom out
Zoom in
Previous page
1/2
Next page
1 2
QUICK USER GUIDE
!!! Please refer to our website: www.geemarc.com for an up to date user guide,
as there may be important updates and changes you need to be aware of !!!
INTRODUCTION
This 2.4GHz DIGITAL WIRELESS INDUCTION NECK-LOOP SYSTEM uses the
latest digital wireless technology. This enables the sound from your selected audio
device directly into your hearing aids. Simply connect the transmitter to the desired
audio source: TV, sound system, etc.
FEATURES
2.4GHz digital hopping system technology
Inductive neck-loop transmits directly to hearing aid
Docking charge mechanism
Battery saving auto RF transmission off (when no audio signal)
In personal listener mode CL7060 mutes audio input.
Speed charging mechanism
Spare battery for continuous use.
Left/right balance and tone control
Optical audio in
COMPONENT PART LIST
(A1) Neck-Loop
Receiver with
audio output jack
(A2) Transmitter
(A3) Polymer Lithium
Rechargeable
Battery x 2 pieces
(A4) AC/DC Adapter
(A5) RCA Adapter
Cable
(A6) Audio Cable (3.5
mm stereo plug at
both ends)
(A7) TOSLINK Optical
Cable
DESCRIPTION
Function Identification: Neck Loop Receiver
(B1) Break-free Plug
(B2) Volume Adjustment
(B3) Power on indicator
(B4) Microphone button for room monitoring
(
B5
)
On/Off switch
(B6) Microphone
(B7) Volume balance (left/right)
(B8) 3.5 mm Audio output jack
(B9) Battery
Function Identification: Charging Cradle
(C1) Charging Cradle
(C2) Spare Charging Slot
(C3) LED Charging Indicator for Spare Battery
(C4) LED Charging Indicator for Main Battery
(attached to neck loop receiver)
(C5) LED Power/Signal Indicator
(
C6
)
Tone Clarit
y
Button
(C7) LED Indicator of Tone Clarity
(C8) DC In
(C9) Mono/Stereo Select
(C10) Optical input for TOSLINK
cable
(C11) 3.5mm Audio In
Please note that only one input (either audio input or optical input) should be
connected.
INSTALLATION
Transmitter
(D1) Connect the power adapter to the DC IN input socket located on the transmitter
rear panel.
(D2) Connect the power adapter provided to an electrical outlet. Make sure the
Power LED on the Transmitter is ON.
(D3) Connect the transmitter to your audio source.
(D4) RCA Adapter Cable, Audio Cable, TOSLINK cable and are provided for different
types of connection to your Audio Source (e.g. TV set, sound system, etc).
(D5) When using the TOSLINK cable ensure that the clear plastic protective covers
are removed from both ends.
Please note that only one input (either audio input or optical input) should be
connected. Where possible the best audio result will be obtained by using the
TOSLINK cable.
The power adaptor with detachable plugs
suitable for UK and Europe.
The green power indicator LED will blink
when you connect the power adapter to
the electrical outlet, When the audio
signal is detected from the audio source,
the green LED Indicator will be on.
SETTING UP THE NECK LOOP RECEIVER
Installation and charging the battery
FRONT
REAR
3.5mm headphone
socket
RCA socket
Optical Jack
FRONT REAR
Fig. A Fig. B Fig. C
Adaptor+UK plug
Europe
plug
1


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Geemarc CL7060 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Geemarc CL7060 in the language / languages: English as an attachment in your email.

The manual is 0,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Geemarc CL7060

Geemarc CL7060 Quick start guide - German - 2 pages

Geemarc CL7060 Quick start guide - Dutch - 2 pages

Geemarc CL7060 Quick start guide - French - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info