695917
2
Zoom out
Zoom in
Previous page
1/2
Next page
5678
1. Press MENU/OK and / to select PHONEBOOK.
2. Press
MENU/OK and / to select SPEED DIAL.
3. Press MENU/OK, use. / to select the speed dial key.
4. Press
MENU/OK
, select ADD or EDIT.
5. Press
MENU/OK then enter the phone number.
6. Press MENU/OK
then enter the NAME.
7. Press MENU/OK to confirm.
To use one speed dial key, press and hold in idle mode the key
between 1 to 9 for 3 seconds (you hear a beep of confirmation). It is
the same speed dial keys for the base and for the handsets cordless.
SOS settings
You need to set the SOS numbers before you can make SOS
emergency calls.
1. Press MENU/OK, and / to select SET SOS.
2. Press MENU/OK, and / to select SOS NUMBER.
3. Press
MENU/OK and / to select the SOS number to edit
(SOS 1, SOS 2, SOS 3 or SOS 4).
4. Press
MENU/OK and select ADD to enter a new number or
EDIT to modify the number stored already.
5. Press MENU/OK and enter a phone number or edit the number
stored already.
6. Press
MENU/OK and enter a new name or edit the name
stored already.
7. Press MENU/OK to confirm or to delete.
Make SOS emergency calls
Press and hold 2 seconds on the base to launch the
emergency calling sequence from the SOS 1 number to SOS 4
number. A call will be first dialed to the SOS 1 number. If the SOS 1
number does not answer in 60 seconds, the call be will made to the
SOS 2 number, and so on. See note.
NOTE:
The other party receiving the SOS message must press any number
on their phone to open the SOS call. Thereafter by pressing any
number on their phone every two minutes will keep the emergency
call open else the phone stops the call 10 seconds after.
To stop the procedure launch by error, press and hold the SOS key
until the alarm SOS stop.
Record SOS messages
You can record your customized SOS message to be played when
you dial out an SOS emergency call otherwise the default message
will be played.
1. Press
MENU/OK, and / to select SET SOS.
2. Press MENU/OK, and / to select SOS MSG.
3. Press MENU/OK and / to select RECORD.
4. Press
MENU/OK to start SOS message recording and
RECORDING ANNC...” will be displayed.
5. Press
MENU/OK to save your SOS message.
Play SOS messages On base
1. Press MENU/OK, and / to select SET SOS.
2. Press
MENU/OK, and / to select SOS MSG.
3. Press MENU/OK and / to select PLAY.
4. Press MENU/OK to to start SOS message playback.
5. Press
/ PLAY/STOP to stop SOS message playback.
You have the choice to store 3 picture memories and one direct
memory on the base.
1. Press MENU/OK, and / to select PHOTO MEM.
2. Press MENU/OK, and / to select M1 to M4.
3. Press
MENU/OK and / to select ADD or EDIT and VOICE
TAG.
4. Press
MENU/OK then enter number.
5. Press MENU/OK then enter name.
6. Press
MENU/OK to save.
You have the option to enter a voice name in choose VOICE TAG and
RECORD at the point 3.
If you receive a call with the number registered with a voice tag, you
can hear the voice name on the base and on the handset.
NOTES:
To use a picture big button memory in idle mode, press the picture
on the base.
If you want to pass the call from the speakerphone to the handset,
lift the handset off the base to take the call.
If the handset is not placed on the base, press SPEAKER to
take the line in speakerphone mode and place the handset on the
base.
Your telephone base includes a telephone answering machine that
records unanswered calls when it is on. The answering machine can
store up to 59 messages within the maximum recording time of
approximately 15 minutes. As well as recording incoming messages,
you can record memos for other users of your phone.
Switching Answering Machine On/Off
Press ANS ON/OFF to switch the answering machine ON or OFF.
Play Messages on TAM
If you have new messages, the display will show e.g.2 NEW
MESSAGES, which means you have 2 new messages. The new
messages are played first, and then are saved as old messages,
until they are deleted. Old messages are played again after all new
messages are played completely.
Press
/ PLAY/STOP to start the playback.
NOTES: After new message is played, the new message will be
saved as an old message automatically unless it is deleted.
During the playback:
1. Press
and / to select STOP, FORWARD, PREVIOUS or
DELETE to perform the following functions during message
playback.
STOP: Stop the current message playback and return to the
ANS. MACHINE menu.
SLOW ON: to reduce the speed of the playback.
FORWARD: Skip to play the next message.
The date and hour information of the next message will display
if there is next message.
PREVIOUS: Skip to repeat playing the current message from
the beginning. The date and hour information of the current
message will display.
DELETE: Delete the current message and the next message
will be played.
2. Press
to confirm the setting.
Set the Answer Delay
You can set the number of rings before the answering machine
answers and starts playing your OGM. You can set the answering
machine to answer after two to ten rings or TIME SAVER.
The TIME SAVER function answers calls after 6 ring signals, until
the first new message has been registered then the answering machine
switches to answering after approximately 2 signals. This is useful
when using remote access; if you call up the answering machine
and there is no reply after four rings it means there are no messages
recorded and you can hang up before you are charged for the call.
1. Press
MENU/OK and / to select ANS.SYS.
2. Press
MENU/OK and / to show SET TAM.
3. Press
MENU/OK and / to select ANSWER DELAY.
4. Press
MENU/OK and / to choose: 2 RINGS, 4 RINGS, 6
RINGS, 8 RINGS, 10 RINGS or TOLL SAVE.
5. Press
to confirm the setting.
REMOTE OPERATIONS
If you are away from your home, you can call your answering machine
to switch on or off the answering machine and listen to your messages
remotely using another tone-dialing phone.
1. Place a call from a tone-dialing phone.
2. When the answering machine answers the call and starts playing
OGM, press
.
3. Enter the 4-digit Remote Access PIN (default PIN is 0000).
4. Press the following keys to carry out your desired function.
KEY FUNCTION
While message is not playing While message is playing
2
Delete the current message
pla
y
back
4
Repeat playing the current
message from the beginning.
Press twice to skip backward
to the previous messa
g
e.
5
Stop the current message
pla
y
bac
k
6
Skip forward to play the next
messa
g
e
7
Turn on the answering machine
9
Turn off the answering machine
Enter the 4-digit remote access
PIN
NOTES:
When your answering machine memory is full, the answer mode
will change to ANSWER ONLY automatically.
It will change to ANS & RECORD mode automatically after some
messages have been deleted.
You cannot delete new messages until they have been listened to.
FUNCTION MESSAGE ALERT
When you have a new message, you can hear a beep every 10
seconds.
If you want deactivate this beep, follow the procedure.
1. Press
MENU/OK and / to select ANS.SYS.
2. Press MENU/OK and / to show SET TAM.
3. Press MENU/OK and / to select MSG ALERT.
4. Press MENU/OK and / to select OFF.
5. Press
MENU/OK to confirm.
You have the choice to enter 10 Alarms.
1. Press
MENU/OK and / to select REMINDER.
2. Press
MENU/OK and / to select your alarm.
3. Press
MENU/OK and / to select ON/OFF.
4. Press MENU/OK and select ON.
5. Press
MENU/OK and enter the time.
6. Press
MENU/OK and choose the frequency.
7. Press
MENU/OK to confirm.
You have the choose to activate or deactivate the function Talking Digits.
Activate: this function announces the digit dial or the CID number
when you receive a call and that you have subscribed to the service.
1. Press
MENU/OK, and / to select TLK DIGITS.
2. Press
MENU/OK, and / to select ON to OFF.
3. Press
MENU/OK to confirm.
Sometimes, our phone rings one time to inform that we have any
voice message on the line. To remove this ringer, you must activate
the function.
1. Press
MENU/OK, and /to select BS SETTING.
2. Press MENU/OK and /to select FIRST RING.
3. Press MENU/OK and select ON.
4. Press
to save.
Clean the surface of the housing with a soft, fluff-free cloth. Do not
use any cleaning agents or solvents.
From the moment your Geemarc product is purchased, Geemarc
guarantee it for the period of two years. During this time, all repairs
or replacements (at our discretion) are free of charge. Should you
experience a problem then contact our help line or visit our website
at www.geemarc.com.
The guarantee does not cover accidents, negligence or breakages
to any parts. The product must not be tampered with or taken apart
by anyone who is not an authorized Geemarc representative.
The Geemarc guarantee in no way limits your legal rights.
IMPORTANT: YOUR RECEIPT IS PART OF YOUR GUARANTEE
AND MUST BE RETAINED AND PRODUCED IN THE EVENT OF A
WARRANTY CLAIM.
Please note: The guarantee applies to the United Kingdom only.
CE Directives
Geemarc Telecom SA hereby declares that this product is in
compliance with the essential requirements and other relevant
provisions of the Radio and Telecommunications Terminal
Equipment Directive RED 2014/53/UE.
The CE declaration of conformity may be consulted at
www.geemarc.com
Recycling Directives
The WEEE (Waste Electrical and Electronic Equipment) has been
put in place for the products at the end of their useful life are recycled
in the best way.
When this product is finished with, please do not put it in your domestic
waste bin. Please use one of the following disposal options:
- Remove the batteries and deposit them in an appropriate WEEE skip.
Deposit the product in an appropriate WEEE skip.
- Or, hand the old product to the retailer. If you purchase a new one,
they should accept it.
Thus if you respect these instructions you ensure human health and
environmental protection.
Basic Information
Valid Ran
e: Indoor : 50m I Outdoor:300m
RF Paramete
r
Frequenc
y
: 1.88 GHz to 1.9GHz
Nb Channels: 10
Power Suppl
y
Input:100-240V 50/60Hz; Output: 6V, 800mA adapte
r
For product support and help visit our website at ww.geemarc.com
United Kingdom: 5B Swallow Court, Swallowfields, Welwyn Garden
City, Hertfordshire, AL7 1SB,UK
telephone 01707 387602
or fax 01707 832529
QUGCL595_En_A3_V1.0
TECHNICAL SPECIFICATIONS
DECLARATIONS
GUARANTEE
MAINTENANCE
FUNCTION FIRST RING
T
A
LKING FUNCTION
A
LARM FUNCTION
ANSWERING MACHINE
PICTURE BIG BUTTON MEMORIES
SOS EMERGENCY CALL
SET SPEED DIAL KEY
2


Need help? Post your question in this forum.

Forumrules
1

Forum

geemarc-cl595

Reset search

  • I have recently purchased a GeeMarc CL595 phone. Despite closely following the instructions the Answering Machine does not function correctly. The machine is on and playback on but even with four purposeful calls
    there is the message 'no new calls. Also no visual indication that the messages have been received.
    I am with the Virgin Media telephone service and I can recover the messages mentioned by telephoning 1571.
    Is this a matter of incompatibility? Submitted on 25-1-2022 at 17:43

    Reply Report abuse
  • I have recently purchased a GMarc CL595 phone and despite following the instructions closely the answering machine will not function correctly. Despite the ON setting being clicked' menu ok' and the message coming up
    'messages will be answered' the only response I get is 'no new messages' and this despite four calls purposely made. There is also no visual indication that these calls to the machine have been made. I am on the Virgin
    Media telephone service and the only way I can recover these messages is dialling Virgin on 1571 Submitted on 25-1-2022 at 17:34

    Reply Report abuse
  • I've read in the User Guide about a "First Ring Function" but I don't understand the description of it. What is it for, what does it actually do, and how do you activate it? Submitted on 13-1-2022 at 00:34

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Geemarc CL595 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Geemarc CL595 in the language / languages: English as an attachment in your email.

The manual is 0,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Geemarc CL595

Geemarc CL595 User Manual - English - 48 pages

Geemarc CL595 User Manual - German - 47 pages

Geemarc CL595 Quick start guide - Dutch - 2 pages

Geemarc CL595 User Manual - French - 48 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info