568035
13
Zoom out
Zoom in
Previous page
1/15
Next page
Room Monitoring
This remote access feature enables you to call your home and turn ON the
answering machine’s microphone function. This means you can monitor
sounds in the room where the answering machine is situated for up to 30
seconds.
Remotely Activate Answering Machine
If you forget to switch on your answering machine on going out, you can
switch it on remotely via another telephone.
Dial your telephone number from the remote telephone and let it ring.
After approximately 10 rings, the machine will answer and emit a long
tone
Enter the remote code, printed on the base of the unit. If the code is
accepted, you will hear two short beeps
Press 9#. You will hear two beeps. This confirms that the
answering machine is now on.
Hang up your telephone
Out of Memory
The total capacity of the answering machine’s memory is approximately 14
minutes. The memory space is shared between the outgoing message,
personal memos, and regular incoming messages. When the memory is
full the display will show FL. The answering machine will answer after
10 rings to allow remote playback and deletion of messages, no new
messages will be accepted until the existing messages have been played
and erased.
No display
Make sure that the power adaptor is plugged in correctly and is not
damaged
CL210A does not ring
Make sure that the telephone line cord is plugged in correctly and
is not damaged
Connect another telephone to the telephone PTT socket or move
your telephone to another socket to track if the failure is coming
from your telephone or your PTT socket
There may be too many communication devices connected to a
single telephone line e.g. another telephone, modem or facsimile
machine. Contact your network provider for help in calculating the
limit for your home or business line
Check the ringer Volume setting is not switched to OFF
No dial tone
Make sure that the telephone line cord is plugged in correctly and
is not damaged
Connect another telephone to the telephone PTT socket or move
your telephone to another socket to track if the failure is coming
from your telephone or your PTT socket
There may be too many communication devices connected to a
single telephone line e.g. another telephone, modem or facsimile
machine. Contact your network provider for help in calculating the
limit for your home or business line
No response on LCD display
Check for a power cut in the area.
TROUBLESHOOTING
ANSWERING MACHINE
21
24
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Geemarc CL210A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Geemarc CL210A in the language / languages: English as an attachment in your email.

The manual is 1,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Geemarc CL210A

Geemarc CL210A User Manual - German, French - 84 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info