568032

Geemarc CL 10 Manual

4
Zoom out
Zoom in
Previous page
1/8
Next page
4
taken by all users that the handset earpiece
volume switch is set to the lowest level
acceptable by each respective user. Care
should therefore be exercised to ensure
that any naive users are familiar with this
requirement.
The handset earpiece volume can be
adjusted by moving the Volume switch,
located above the handset microphone, to
High, Medium or Normal.
5 - USING THE TELEPHONE
Having connected the telephone to the
telephone socket, lift the handset, await dial
tone, and dial required number. On
completion of the call, carefully replace
handset in cradle.
6 - MEMORY OPERATION
Your telephone can store up to 3 'One
touch', and 10 'Two touch' telephone
numbers. Each telephone number must
be stored in a specific memory location and
can be up to 21 digits long. If you wish to
store a number having more than 21 digits
(as may be required, for example, by
international numbers preceded bya3or
4 digit national operator access code), it is
suggested that the 3 or 4 digit access code
is stored in a 'One touch' location and the
international number stored in any other
location.
Note : Numbers stored in the memory may
be lost if the telephone is disconnected from
the telephone line.
7 - STORING TELEPHONE NUMBERS
a) 'One touch' locations
1. Ensure telephone is plugged into
telephone socket and lift handset.
2. Press
button.
3. Press one of the 'One touch' direct
memory buttons, M1, M2 or M3.
4. Dial the telephone number you wish to
store.
5. Press the
button again.
6. Repeat steps 2 to 5 for the remaining two
'One touch' locations.
7. Replace handset.
b) 'Two touch' locations
1. Ensure that telephone is plugged into
telephone socket and lift handset.
2. Press
button.
3. Press MEM button.
4. Press any button 0 to 9 on the keypad
under which you wish to store the telephone
number.
5. Dial the telephone number you wish to
store.
6. Press the
button again.
7. Repeat steps 2 to 6 for any other
numbers you wish to store allocating a
different keypad number for each and then
replace the handset.
8 - DIALLING STORED TELEPHONE
NUMBERS
a) 'One touch' locations - Lift handset,
await dial tone and press appropriate direct
memory button M1, M2 or M3. The stored
number will be dialled out automatically.
HMN
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Geemarc CL 10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Geemarc CL 10 in the language / languages: English, French as an attachment in your email.

The manual is 0,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info