519999
30
Zoom out
Zoom in
Previous page
1/34
Next page
35
26
HS Name
Range Alarm
Using this feature you can define a name of the
handset. This allows you to easily recognize your
handset if you have more than one registered on
the same base. To set the handset name:
1. Press the Menu soft key.
2. Press the key repeatedly to choose HS
Settings, press the Select soft key.
3. Use the key to choose HS Name, then
press the Select soft key.
4. You can enter the handset name (up to 12
characters) by using the alphanumeric keys
(use the Erase soft key to delete the incorrect
characters), then press the Save soft key to
confirm and exit. The handset name will be
displayed above your handset number in
standby mode.
A beep will sound when the handset is out of
range of the Base. You are able to select to
enable/disable this audible warning.
1. Press the Menu soft key.
2. Press the key repeatedly to choose
HS Settings, press the Select soft key.
3. Use the key to choose Tone Setup,
then press the Select soft key.
4. Use the key to choose Range Alarm,
then press the Select soft key.
5. Use the key to choose On/Off to
enable/disable this audible warning, then
press the Save soft key, you will hear a
confirm beep.
BS Settings
Terminate HS
This function allows you to delete a handset
registration from the base.
BS Settings
Select soft key
3. Press the Select soft key to choose the
Terminate HS menu. The display shows
"PIN?" to prompt you to enter the PIN Code
(The default PIN Code is "0000"). Then
press the OK soft key.
4. Use the key to select a handset. If you
select the current handset or a non-existent
handset, a warning tone will sound.
5. Press the Select soft key to confirm, and the
selected handset will behave according to
the Out Of Range condition.
1. Press the Menu soft key.
2. Press the key to choose ,
then press the .
Flash Time
You can select to change the Flash time by the
following steps:
1.
2. Use the key to choose Flash Time menu.
Press the Select soft key.
3. The display shows the current setting. Use the
key to select Flash-1(100ms for UK)
/Flash-2(270ms) , press the Save soft key.
Perform steps 1 and 2 of previous paragraph.
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Geemarc AmpliDECT 280 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Geemarc AmpliDECT 280 in the language / languages: English as an attachment in your email.

The manual is 3,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Geemarc AmpliDECT 280

Geemarc AmpliDECT 280 User Manual - German - 67 pages

Geemarc AmpliDECT 280 User Manual - Dutch - 38 pages

Geemarc AmpliDECT 280 User Manual - French - 80 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info