544625
1
Zoom out
Zoom in
Previous page
1/4
Next page
Instructions for Assembly and Use
TCS-Cody 3
Electronic encoder-type lock
The TCS-Cody is a modern and safe alternative to traditional key switches.
The TCS-Cody can safely be used after two simple programming steps (master
code and pass code). For opening or closing of the door only a four- or five-digit
numeral code (pass code) has to be entered, which has been previously program-
med via the master code by an authorized person.
After correct input of the pass code and actuation of arrow keys UP
or DOWN
the drive (UP or DOWN) is triggered by the corresponding relay contact.
The high flexibility of the encoder is achieved by extensive programmability of the
individual operating functions. All sections required for operation are, however, pre-
programmed and thus immediately ready for use.
Technical Data:
24 V series 230 V series
Supply voltage 12 - 24 V AC / DC 230 V AC 50 Hz
Output 3x NO, NC relay contact, 3x NO, NC relay contact,
isolated, 8 A 250 V isolated, 8 A 250 V
Connections 2.5 mm
2
max., 2.5 mm
2
max.,
Ambient- -20 ˚C to +60 ˚C -20 ˚C to +60 ˚C
temperature
Adaptation of the TCS-Cody 3 to special requirements:
The TCS-Cody 3 is provided with a series of flexible time settings which allow the adaptation
to special cases of application. For programming these special operating modes please ask
for our flow chart for the TCS-Cody series, if required!
geba GmbH is released of its obligations regarding guarantee and product liability if - without
prior permission - the unit has been modified, or if the installation is unproper or not in
accordance with our instruction manual.
The installer has to take care that the EMC-regulations are respected.
GB
The most important characteristics of the TCS-Cody are:
Simple operation, programming and assembly.
Water-protected enclosure
A maximum of safety:
The electronic decoder is separately installed in the
protected area
Up to 50 different pass codes can be stored
Up to 100 million different coding possibilities
Variable lock-out function
Nearly unlimited data security, even with power failure
Three potential-free relay outputs
After entry of a valid pass code and within 30 seconds the user can con
trol the drive unit connected in dead man‘s operation by means of arrow
keys ”UP” and ”DOWN” .
High switching capacity for direct control of appliances
industial controls
®
industial controls
®
1


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Geba Tronic TCS-Cody 3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Geba Tronic TCS-Cody 3 in the language / languages: English as an attachment in your email.

The manual is 0,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Geba Tronic TCS-Cody 3

Geba Tronic TCS-Cody 3 User Manual - German - 4 pages

Geba Tronic TCS-Cody 3 User Manual - Dutch - 4 pages

Geba Tronic TCS-Cody 3 User Manual - French - 4 pages

Geba Tronic TCS-Cody 3 User Manual - Spanish - 4 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info