544889

Geba Tronic ROLLOTIMER Standard Manual

2
Zoom out
Zoom in
Previous page
1/2
Next page
Programming of ROLLOTIMER Standard
1. Enter programming mode
Press ▲ (UP) and ▼ (DOWN) simultaneously
for approx. 3 seconds.
2. Time of day
programming
Setting of the hour
18 : 32
Use ▲ (UP) to set the hour.
Press ▼ (DOWN).
Setting of the minutes
18 : 32
Use ▲ (UP) to set the minutes.
Press ▼ (DOWN).
3. Automatic
opening
programming
Setting of the hour
07 : 20
Use ▲ (UP) to set the hour.
Press ▼ (DOWN).
Setting of the minutes
07 : 20
Use ▲ (UP) to set the minutes.
Press ▼ (DOWN).
4. Automatic
closing
programming
Setting of the hour
21 : 45
Use ▲ (UP) to set the hour.
Press ▼ (DOWN).
Setting of the minutes
21 : 45
Use ▲ (UP) to set the minutes.
Press ▼ (DOWN).
5. Operation Mode
setting
Use ▲ (UP) to set one of the following modes:
man = manual operation
auto = set automatic opening and closing time
var = a random generator changes the set
automatic opening and closing time by +/- 15
minutes
6. Exit
programming
mode
Press ▼ (DOWN).
Note: setting of the values
The value which you want to set is selected by the DOWN button and is signaled by the flashing of
the value.The value itself is set with the UP button which is raised with every push.
The values are raised automatically by pressing permanently the button. If you have reached the
desired value, confirm it by pressing DOWN which will switch automatically to the next value for
programming.
The programming mode will be closed automatically, if there is no input for 30 seconds. All set values
until then are set and safed. Due to the premature closing of the programming mode, the operation
mode will be set to manual (man).
Operation of the Rollotimer
push ▼ (DOWN) < 1 second Jog mode or STOP, if motor is running already
push ▼ (DOWN) > 1 second DOWN command
push ▼ (DOWN) > 6 seconds DOWN command +
time saved for DOWN command
push ▲ (UP) < 1 second Jog mode or STOP, if motor is running already
push ▲ (UP) > 1 second UP command
push ▲ (UP) > 6 seconds UP command +
time saved for UP command
push▼ (DOWN) + ▲ (UP) < 1 second
simultaneously
Change of operation mode
push ▼ (DOWN) + ▲ (UP) > 1 second and < 3
seconds simultaneously
Activation of programming mode
push ▼ (DOWN) + ▲ (UP) > 6 seconds
simultaneously
General reset
(restore factory settings)
Jog mode
To adjust the angle of the venetian blinds push the UP or DOWN button (up to 1 second). The
automatic mode (auto) remains unchanged.
Quick programming
If the UP or DOWN button is pressed longer than 6 seconds, the blind is running in the direction and
the current time will be saved as the automatic UP or DOWN command time (memory function).
Operation modes
Manual mode man
Automatic mode (day programm) auto
Vacation mode: automatic + random generator var
You can enable the manual mode (man) by pushing the UP and DOWN buttons simultaneously. By
repeating this, it will be switched back to the original mode (auto or var)
The activation of the automatic mode (auto) will open and close the blinds according to the
programmed times.
The activation of the vacation mode (var) will open and close the blinds according to the
programmed times with a randomly generated shift of +/- 15 minutes.
The blinds can be open and closed manually in any operation mode by pushing ▲ (UP)
or ▼ (DOWN).
Factory settings
Day programm UP 07:00h, DOWN 21:00h
Time 00:00h
Mode Man
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Geba Tronic ROLLOTIMER Standard at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Geba Tronic ROLLOTIMER Standard in the language / languages: English as an attachment in your email.

The manual is 0,14 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Geba Tronic ROLLOTIMER Standard

Geba Tronic ROLLOTIMER Standard User Manual - English, German - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info